Contents
What voltage should a battery charger read?
12.6V volts
12.6V volts or above – Your battery is healthy and fully charged. No further action is required. 12.5 volts – Your battery is at a healthy state of charge, but we’d recommend re-checking it within a few days to ensure the voltage hasn’t dropped any further.
What is the normal voltage of a charger?
A PC USB charger delivers 2.5 Watts of power (5 volts at 500 mA). An iPhone charger delivers 5 Watts (5 volts at 1000 mA). A Retina iPad mini charger delivers 10 watts (5.1 volts at 2100 mA).
Can a pulse Charger be used to kill a battery?
The only thing you do is killing the battery completely. If a battery has a resting voltage of at least 1.8 Volts/cell and no cells are shorted, desulphation of its plates can be done. This circuit is an add-on and part for a modification of a normal charger and it takes care of the sulphate problem.
What should I replace my pulse charger with?
Start by ripping out everything except the transformer and the rectifier. Some older chargers are equipped with fin rectifiers, which have high voltage drop and must be replaced. Replace with a rugged bridge rectifier that can cope with the amperes. All wiring on secondary should be short and heavy wire.
How to boost the performance of a pulse Charger?
There are some tricks to boost the performance if you need it. Start by ripping out everything except the transformer and the rectifier. Some older chargers are equipped with fin rectifiers, which have high voltage drop and must be replaced. Replace with a rugged bridge rectifier that can cope with the amperes.
Why do I Pulse my battery when charging?
Also, don’t forget to adjust your charge voltages for temperature — Arizona charging is probably different from Alaska charging. Also, during the main charge, you may want to pulse, because it supposedly knocks off the sulfation, also increasing battery life.