What is the best type of valve?
Ball valves are perhaps the most reliable type of valve and are commonly used for main water shutoffs and for branch line shutoffs. Like gate valves, a ball valve is designed as an all-or-nothing valve—they should be either fully open to allow full flow, or fully closed to stop all water flow.
How do you choose a valve type?
Determine the pressure and temperature requirements. Find out both the temperature and pressure ranges where the valve will be installed. Metal valves tend to withstand higher temperatures and pressures than plastic valves. Metal valves are also usually best for pressurized gases.
Which is better ball or gate valve?
Ball valves are more effective at forming a tight seal and have more reliability and longevity than gate valves, but tend to be more expensive. They are often used for shutoff and control applications. Because ball valves can open and close immediately, they are more likely than gate valves to cause water hammer.
What valves are used for throttling?
The two main types of valves that we offer for throttling applications are our globe valves and our needle valves. In both these types of valves a stem is raised and lowered into the flow path and can be stopped at any point and left in that position.
What is another name for isolation valve?
A diaphragm isolation valve—also known as a “membrane valve”—is a solenoid-operated device that uses a diaphragm that extends and retracts to seal the valve seat and isolate the flow path.
How do I choose a valve size?
When sizing a control valve, the rule of thumb is to size it so that it operates somewhere between 20-80% open at maximum required flow rate and whenever possible, not much less than 20% open at the minimum required flow rate.
When would you use a ball valve?
A ball valve is used to control the flow and is typically used as a shut off valve.