Contents
What is stacked antenna?
Stacked Antenna Arrays or Stacked Array is usually referred to as a set of directional antennas like the Yagi, the Cubical Quad, or the Helical antenna being placed in the vicinity of one another while being driven by a common RF transmitter.
What is inside Yagi antenna?
A Yagi antenna or a Yagi-Uda antenna, is a directional antenna that radiates signals in one main direction. It consists of a long transmission line with a single driven element consisting of two rods connected on either side of the transmission line. A typical Yagi antenna has one reflector and one or more directors.
Will 2 antennas work?
Adding a second antenna can increase the signal path coverage and give you a more consistent signal. To accomplish this you will need a combiner or coupler that can combine the two antennas together. I would recommend that you use two identical antennas. This will ensure a balanced signal path and coverage.
What is the extra gain from stacking Yagis?
Increase in gain due to stacking to double number of Yagis in either plane with distances according this formula results in measured max. extra gain of 2.9 dB (cable and transformation losses excluded). Here Peter V. Viezbicke and DL6WU give same number.
What is the optimal stacking distance for a Yagi?
Thereoretically the additional gain for a second Yagi with optimal stacking distance is 3 dB (exception: Dipole and 2-El.-Yagi 4 dB). The stacking distance depends on the radiation angles (azimuth and elevation) of each single Yagi.
How does the stacking of antennas increase the gain?
Stacking of antennas is a method for increasing the gain by decreasing the radiation angles. Thereoretically the additional gain for a second Yagi with optimal stacking distance is 3 dB (exception: Dipole and 2-El.-Yagi 4 dB). The stacking distance depends on the radiation angles (azimuth and elevation) of each single Yagi.
How many yagis are used in HF modeling?
HF modeling generally uses shorter Yagis, when measured in terms of either the number of elements or the boom-length. Most data involves 3- to 8-element Yagis. I have looked at the HF question in the past, and the results are at my site: Stacking Yagis.