What is the meaning of antenna pattern?

What is the meaning of antenna pattern?

In the field of antenna design the term radiation pattern (or antenna pattern or far-field pattern) refers to the directional (angular) dependence of the strength of the radio waves from the antenna or other source.

What is multipath effect?

Multipath is the phenomenon of fluctuations in signal strength formed by incoherent combination of signals coming from different directions through reflection or scattering with the direct signal. These reflected or scattered signals have different amplitudes and phases compared to the one received directly.

What is multipath reception?

The mobile or indoor radio channel is characterized by ‘multipath reception’: The signal offered to the receiver contains not only a direct line-of-sight radio wave, but also a large number of reflected radio waves. This phenomenon remains present, even if the (average) signal-to-noise ratio is large.

How can we reduce multipath?

Clearly, the best way to reduce the effects of multipath is to try avoiding it in the first place by siting the receiver’s antenna as low as possible and far away from potential reflectors.

What is the effect of multipath reception?

Multipath results in an error in pseudorange measurements and thus affects the positioning accuracy, since the multipath signal takes a longer path than the direct signal.

How are antennas used to reduce multipath interference?

Antenna Design and Multipath. Ground planes, usually a metal sheet, are used with many antennas to reduce multipath interference by eliminating signals from low elevation angles. Generally, larger ground planes, multiple wavelengths in size, have a more stabilizing influence than smaller ground planes.

Is the attribute of multipath determinative in GPS?

However, in the face of multiple reflections the attribute is not determinative. In any case, these characteristics allow some multipath signals to be identified and rejected at the receiver’s antenna. GPS antenna design can play a role in minimizing the effect of multipath.

How is a multipath signal different from a direct signal?

Fortunately, there are factors that distinguish reflected multipath signals from direct, line-of-sight, signals. For example, reflected signals at the frequencies used for L1, L2, and L5 tend to be weaker and more diffuse than the directly received signals. Another difference involves the circular polarization of the GPS signal.

How is the polarization of a multipath signal reversed?

The polarization is actually reversed when the signal is reflected. Reflected, multipath signals become Left Hand Circular Polarized, LHCP, whereas the signals received directly from the GPS satellites are Right Hand Circular Polarized, RHCP. RHCP means that it rotates clockwise when observed in the direction of propagation.