Contents
What is effective isotropic sensitivity?
EIS is the Effective Isotropic Sensitivity. In antenna measurements, the measured sensitivity in a single direction (that is, for a fixed and ) is known as the EIS. If the EIS value was measured for an antenna system with an isotropic antenna, then the EIS would be the same as the Total Isotropic Sensitivity (TIS).
How is EIRP measured?
A simple rectangular conducting plate with a dimension of 0.15 m × 0.6 m in the x- and y-directions, respectively, was excited by the wave-port model. Since the input power to the antenna was 0 dB and the simulated far-field gain was = 15.44 dBi, the reference EIRP can be calculated as EIRP = = 15.44 + 0.0 = 15.44 dB.
What is the difference between ERP and EIRP?
EIRP is the Effective isotropic radiated power is the total power radiated by a hypothetical isotropic antenna in a single direction. ERP is Effective Radiated Power is the total power radiated by an actual antenna relative to a half-wave dipole rather than a theoretical isotropic antenna.
What is total isotropic sensitivity?
Total Isotropic Sensitivity (TIS) is a radio frequency (RF) engineering term used to describe the total available receive performance of a device with a real antenna. Total Isotropic Sensitivity is measured on an antenna test range, most often an anechoic chamber.
What does EIRP stand for?
Equivalent isotropic radiated power, EIRP, is the total radiated power from a transmitter antenna times the numerical directivity of the antenna in the direction of the receiver, or the power delivered to the antenna times the antenna numerical gain.
How is isotropic sensitivity measured?
Total Isotropic Sensitivity is measured on an antenna test range, most often an anechoic chamber. An RF signal generator of some sort is used to generate data traffic; the receiver then reports or allows for measurement of data error rate.
What does total isotropic sensitivity ( Tis ) mean?
Total Isotropic Sensitivity (TIS) is a radio frequency (RF) engineering term used to describe the total available receive performance of a device with a real antenna. TIS is expressed in terms of power: Watts (W), milliwatts (mW), or the logarithmic terms for W and mW (dBW and dBm; most commonly, dBm).
How is the total isotropic sensitivity of an antenna measured?
Total Isotropic Sensitivity is measured on an antenna test range, most often an anechoic chamber. An RF signal generator of some sort is used to generate data traffic; the receiver then reports or allows for measurement of data error rate.
What is the EIS of an isotropic receiver?
If you were designing a link budget, EIS is the minimum power required at the receiver, assuming the receiver is an ideal isotropic receiver. The EIS encapsulates the effects of both the receiver’s sensitivity and antenna system.