Contents
Do you need to ground a fiberglass antenna?
Fiberglass is an insulator, and not a conductor. As such, a plain fiberglass whip with nothing inside would not be an antenna. So, no, the element inside the fiberglass would not, or should not, be connected to ground.
Where is the best place to mount CB antenna on a Class C motorhome?
Installing the mount on a spot with a cabinet inside the RV is a good idea. That way the interior access is hidden. Another option for running a new coax is to install the antenna on the rear of the RV (even on the ladder), then run the coax down the ladder, under the vehicle, and back up through the firewall.
What happens if I dont ground my CB antenna?
A ground plane for a CB radio antenna is the metal surface required below the antenna. Damage to your CB radio may also occur if you do not have a proper ground plane because this generally causes a high SWR and the signal may back feed into the transceiver, causing internal damage to your radio.
What is Channel 9 on a CB?
universal CB emergency channel
Channel 9 is the universal CB emergency channel. In most areas, it is monitored by local law enforcement at all times, so please keep random chatter off this channel. Channels 17 and 19 are commonly used channels by truck drivers.
Do I need a CB radio in my RV?
As an RV driver, you can use CB radio when other forms of communication are compromised. CB Radio is also a handy tool to get specific and general information about the surrounding areas. Add all this to how easy and inexpensive it is to operate, and there’s really no reason not to have one in your RV.
How do you ground a CB radio chassis?
What that entails is if you mount the CB radio on a non-grounded surface you will need to run a ground strap (preferably a flat wire type with soldered ends and as short as possible run) from either the mounting bracket or the chassis of the radio itself (4 screws holding the chassis together) to form a good ground.
What makes a good ground plane for an RV?
The magnet keeps them connected to the metal roof, however, what a lot of folks don’t realize is that the metal roof is also serving as the ground plane – an integral part of the antenna’s performance. Most RVs and boats don’t have a metal roof – they are fiberglass, rubber or some other material.
What kind of CB radio do I need for my RV?
RV & Motorhome CB Equipment. 1 Cobra 18 RV CB Package. From $164.95. An RV package that includes everything you need for a quality CB and antenna installation. 7 Reviews. 2 Cobra 75 WX ST. 3 Cobra 18 WX ST II. 4 Firestik NGP 3-Way Mount CB Antenna Kit. 5 Firestik NGP Side Mount CB Antenna Kit.
Can a car antenna be used as a ground plane?
These antennas are specifically designed for automobile use, and being placed on the roof of a metal car or truck. The magnet keeps them connected to the metal roof, however, what a lot of folks don’t realize is that the metal roof is also serving as the ground plane – an integral part of the antenna’s performance.
Do you need a ground plane for mobile internet?
Mobile internet information for RVers and Cruisers. Part of omnidirectional cellular antenna design is a ground plane – or metal that reflects signal into the antenna itself. Many antennas have a ground plane built in, but in particular magnetic mounted antennas (often kitted with mobile boosters) require one be provided.