Contents
Can you use rubber hose for AC lines?
Do not use any rubber lined hydraulic braided hose for AC applications. The freon will permeate through the rubber in no time, and the system oil will eat the rubber up. Make sure it is made specifically for AC.
What is AC line made of?
Refrigerant lines are two copper lines that connect the outdoor air conditioner or heat pump to the indoor evaporator coil. The larger line typically carries a cool gas and is insulated. This is commonly referred to as the suction line, but it is also called the return line or vapor line.
Can AC hoses be repaired?
Although the AC, or air conditioning, lines in most cars today are aluminum, there are still plenty of older cars out there that use rubber hoses for their AC systems. Rubber hoses are flexible and versatile, and are fairly easy to repair, but the rubber decays over time.
Does Napa make AC lines?
Our Products Are Engineered And Tested To Provide Years Of Trouble Free Operation. Backed By Over 50 Years Of Mobile A/C Experience, Fix It Once And Fix It Right With NAPA Temp.
Can I use compression fittings on AC lines?
The question is : can I cut into the aluminum portion of the a/c line going into the condensor and use compression fittings. One Napa guy said absolutely you can use compression fittings and use aluminum fuel line. Another said no way, the gas would escape.
Can an AC line be repaired?
Some components are built to last the life of the unit, such as the compressor and condenser, while minor parts such as the aluminum lines can become damaged through normal wear and tear. Repairing an aluminum AC line is a relatively simple job.
Which AC line is cold?
The low side, or suction line, will be the line connected to the compressor from the top or higher position. It will be cold to the touch and may be wrapped with insulation. This is where freon enters the compressor as a gas.
What are the three major refrigerant lines?
The suction line connects the evaporator to the compressor, the discharge line connects the compressor to the condenser, and the liquid line connects the condenser to the expansion device.
Can you use an fittings for air conditioning?
thanks. There are braided-type hoses and fittings made for AC use, but the usual stuff you use for oil hoses, etc. will not work. Refrigerant molecules (especially R-134a) will seep right through most rubber hoses and the AN flare fittings as well.
Can You Make your own air conditioner fittings?
Make your own Air Conditioning assemblies using the nickel plated, reusable fittings. Designed to pair with Aeroquip’s stainless braided A/C hose for a DIY A/C hose assembly made right in your garage!
Where can I find cold hose AC fittings?
AC Hoses, Hose Kits and Fittings Cold Hose is an automotive air conditioning fitting and hose website. We carry a full line of a/c fittings, hoses, charge adapters, and oring seals. All the fittings and hoses are indexed by size and or thread size.
How to make your own air conditioner at home?
Fill a cooler with ice water. Stick the end of the piece of tubing that is not connected to the fountain pump into the bottom of the cooler. Put the fountain pump in the cooler, submerged in the ice water. Lay a towel under the fan to catch the condensation that drips from the copper tubing.
What do you need to know about cold hose?
Cold Hose is an automotive air conditioning fitting and hose website. We carry a full line of a/c fittings, hoses, charge adapters, and oring seals. All the fittings and hoses are indexed by size and or thread size. Cold hose has weld on barbs, compressor adapters, and much more on the specialty fittings page.