Contents
Can I just replace the wheel bearing and not the hub?
If your car or truck has a non-serviceable wheel hub assembly with press in bearings, you will need a shop press to remove and replace the bearings. If your car or truck has non-serviceable wheel hubs, simply remove the old wheel hub and replace it with a new part.
What parts do you need to remove when removing the front wheel hub and bearing?
Hub Unit Bearing Removal
- Raise vehicle and remove lug nuts and wheel.
- Remove the brake caliper and rotor.
- Remove the axle nut, using an axle nut socket.
- Before removing hub unit, make a note of the proper orientation and positioning of the sensor wire and bearing.
- Remove the steering knuckle attachment bolts.
How do you take off a wheel bearing?
To remove the inner wheel bearing, you first need to pry the seal out of the back of the hub. You’re replacing it, so don’t worry about destroying it. A long screwdriver rocking on a fulcrum point like the handle of a hammer usually does the trick. With the seal out, withdraw the inner wheel bearing.
Do both wheel bearings need replaced at the same time?
Both wheel bearings have racked up the same number of miles, so it’s logical to conclude that both sides have probably experienced the same amount of wear. Based on this line of thinking, it would make sense to recommend replacing both wheel bearing hubs at the same time even though only one has obviously failed.
How hard is it to change a wheel bearing?
Is it easy to replace a wheel bearing at home? Replacing a wheel bearing that comes as an assembly with the hub and bolts to the spindle or steering knuckle is not very difficult if you have proper skills, tools and the manual. Of course, the large axle nut is very tight and can be difficult to remove.
What do I need to remove bearings from wheel?
Failing that you can do without. First you need a hammer, punch, gloves, safety glasses, a torch and a piece of scrap wood to go between the hub and whatever surface you’re hammering the hub on. After removing wheel from the hub you should be able to get the seals and bearings out with basic tools (Keep the seals for the time being).
Is it expensive to replace a wheel bearing?
The parts AND labor are expensive. The hub assembly must be removed from the car or truck and set in a press, which is then used to press the bearing out of the assembly. One wrong move with the press and you run the risk of damaging the hub assembly.
Do you have to replace the hub bearings?
The bearings are not designed to be removed from the hub assembly. The entire hub assembly must be replaced. Though the repair is not labor intensive, the necessary hub assembly can be expensive for some makes and models. Consider this type the “worst of both worlds.” The parts AND labor are expensive.
Can you replace a wheel bearing at Pep Boys?
On some cars, you can just replace the bearing and call it a day. On others, the hub assembly must be removed and replaced. The most difficult type involves removing the hub assembly and setting it in a press. If you’re not sure what type of wheel hub assembly you have, stop by or give your local Pep Boys store a call.