Contents
What size tires fit a 2013 Subaru Outback?
225/60R17
Subaru equips the 2013 Outback 3.6R Limited with a 225/60R17 tire.
What size tires can I put on my Subaru Outback?
The Outback comes with 225/60R18 100H tires on its upper-end models. Here’s what those numbers mean: 225 – is the width of the tire from one sidewall to the other in millimeters–in other words the tread width.
Is it OK to change tire size?
Installing larger wheels and tires, also known as “plus-sizing,” can affect the accuracy of its speedometer and odometer, handling, steering response and more. If done incorrectly, changing the tire size can be detrimental to the safety of your vehicle.
How do you reprogram a tire size?
How to Size Your Tires
- Multiply the width by the aspect ratio expressed as a decimal (225 x 0.55 = 123.75).
- Convert the aspect height to inches (123.75 / 25.4 = 4.87).
- Multiply the aspect height by 2 (4.87 x 2 = 9.74).
- Add the inside diameter of the tire (16 + 9.74 = 25.74).
- Repeat for the size of the new tire.
What tire sizes mean?
The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.
What size tires go on a 2017 Subaru Outback?
Subaru Outback 2017 2.5i
| Tire | Rim | |
|---|---|---|
| 225/65R17 102H | 7Jx17 ET55 | 2.4 / 2.3 |
| 225/60R18 100H | 7Jx18 ET55 | 2.4 / 2.3 |
| 245/60R17 102H | 7.5Jx17 ET51 | 2.4 / 2.3 |
| 245/55R18 100H | 8Jx18 ET48 | 2.4 / 2.3 |
Can you change just one tire on a Subaru?
Your Subaru’s AWD system needs tires of uniform diameter and tread pattern to operate at peak performance. Subaru recommends replacing all four tires at once. However, if your remaining three tires are relatively new then you may be able to replace just one with the same brand, model, and size.
Can you recalibrate a speedometer?
Electronic speedometers are easy to calibrate. Manufacturers always provide the distance of the test drive needed for speedometer calibration. This information is normally available in the owner’s manual. Identify the speedometer calibration button and press-hold, crank your vehicle and then release the button.
How do you recalibrate a speedometer after tire size?
Press and hold the calibration button located on the speedometer, start the vehicle, and then release the button. Press that button again and then take the test drive. Once you have driven the distance needed, press the button once more and the speedometer will calibrate itself to accommodate the new tire size.