When replacing a water pump What else should you replace?

When replacing a water pump What else should you replace?

Check your owner’s manual for the proper interval to replace your timing belt and water pump or stop in and have one of our service experts review your car or truck’s maintenance needs with you one-on-one. Generally, the idler pulleys, tensioner and water pump should always be replaced when the timing belt is replaced.

Can you replace just the water pump?

The location of the water pump in relation to the engine can vary by application. Whether you can replace it yourself depends on how much experience you have. However, a person who easily figures out how to do things can usually replace a water pump that is on the front of the engine, without any mechanical experience.

Should I replace the water pump or just the gasket?

If the water pump is more than 5 years old or has more than 60,000 miles, replacing the pump while you are addressing the leaky gasket will be less risky, more efficient, and cost-effective. Water pump bearings and seals do not last forever.

How long does it take to change a water pump and timing belt?

between 3 to 6 hours
How long does a timing belt and water pump replacement take? The average time taken for a water pump and timing belt change is between 3 to 6 hours.

How long does it take to remove and replace a water pump?

On average, water pump replacement is a 3 hour job. You may pay less if you buy the pump yourself and give it to the mechanic to install, though use caution and make sure to buy the parts from a reputable source.

What should I do if my water pump needs to be replaced?

Since you’ll be rerouting the serpentine belt, this is a good time to also inspect the belt and its tensioner. If the belt needs to be replaced, chances are the tensioner will as well. Test-fit the water pump and visualize assembly before proceeding. Use RTV silicone water pump gasket sealer and/or a gasket if your repair manual recommends it.

Should I replace the water pump at the same time as the timing belt?

If that is the case, then it is advisable to replace the water pump & auxiliary drive belt at the same time as the timing belt while the mechanic has access to all the parts. Once the timing belt is removed, it is only a matter of loosening a few more bolts and screws to change the water pump as well.

Do you need to remove radiator to replace water pump?

Your vehicle’s repair manual will tell you which components you’ll need to remove to get to the water pump. On some engines, you may need to remove the radiator, shroud and hoses to access the water pump. You may also need to remove the fan, pulleys and harmonic balancer, which will require a specialized puller. Remove the old water pump.

Do you need to replace the tensioner on a water pump?

If the belt needs to be replaced, chances are the tensioner will as well. Test-fit the water pump and visualize assembly before proceeding. Use RTV silicone water pump gasket sealer and/or a gasket if your repair manual recommends it. Take your time with this step as leaks can result if done improperly.