Contents
How do you fix a brake problem?
How to Troubleshoot Brake Problems
- With the vehicle at rest, apply steady pressure to the brake pedal. Does it feel spongy?
- Release the parking brake and drive around the block, stopping every now and then.
- If you feel that your brakes are low, pump the brake pedal a couple of times as you drive around.
Why is my brake light still on after changing my brakes?
If you skipped the pedal apply step and now have a brake light on after brake job, simply shut off the engine and perform it now. If the pedal firms up but the brake light stays on, you’ll have to reset the pressure differential switch. The switch is located in different places on every vehicle.
Why does my brake pedal travel so long after a pad change?
Somehow air had got into the brake system on pushing the brake pistons back to accomodate the new pads. In my case, the system needed bleeding and everything was fine thereafter. What is happening is that the new pads have got to bed in to the profile of the old discs and you are probably only braking on about 40% of the swept area.
Why does my Astra brake pedal travel so long?
The front brake pads on my Astra have just been replaced and although the car stops as normal, the pedal travel seems longer / softer than before. The Haynes manual warns that master cylinder problems can be created by pushing the piston back.
What to do if your car has excessive pedal travel?
If you don’t typically engage your parking brake, the parking brake can be key in figuring out if your car is suffering from excessive brake pedal travel. If the parking brake doesn’t properly engage, that generally means a low pedal. 3. Bleed the Brakes.
What’s the correct order for brake pedal travel?
In traditional systems, you begin with the longest line in the circuit first, and go from the right rear, left rear, right front, and left the front. In diagonally split systems, the order is right rear, left front, left rear, and right front. Flush out the bleeder valves, and finally, remove the air from your master cylinder.