Contents
- 1 What kind of antifreeze does a 2002 Mercury Sable take?
- 2 What kind of antifreeze does a 2001 Mercury Sable take?
- 3 How much oil goes in a Mercury Sable 2002?
- 4 What kind of oil does a 1999 Mercury Sable take?
- 5 How much oil does a 2002 Mercury Sable take?
- 6 How do you reset the oil light on a 2008 Mercury Sable?
What kind of antifreeze does a 2002 Mercury Sable take?
Prestone 1 Gallon Purple 50/50 Coolant/Antifreeze.
What kind of antifreeze does a Mercury Sable take?
Prestone 50/50 Coolant/Antifreeze.
What kind of antifreeze does a 2001 Mercury Sable take?
Prestone Antifreeze/Coolant American Vehicles Orange 50/50 PREMIXED *10 Year/300K Mile Protection* 1 Gallon.
How many gallons of coolant does a 2002 Mercury Sable GS use?
2002 Mercury Sable – Specs
| Body Style | 2002 Mercury Sable |
|---|---|
| Coolant Capacity (quarts) | 11.6 / 10.6 |
| Transaxle | 4-speed automatic overdrive |
| Axle Ratio | 3.77:1 / 3.98:1 |
| Final Drive Ratio | 3.77:1 (3.0L 0HV Vulcan) / 3.98:1 (3.0L DOHC Duratec) |
How much oil goes in a Mercury Sable 2002?
Capacity: 5.5 quarts (with filter)After refill check oil level.
What kind of oil does a 2003 Mercury Sable take?
Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.
What kind of oil does a 1999 Mercury Sable take?
Mercury Sable 1999, Extended Performance™ SAE 5W-20 Full Synthetic Motor Oil, by Mobil 1®.
How much oil does a 2003 Mercury Sable take?
5.5 quarts
Capacity: 5.5 quarts (with filter)After refill check oil level.
How much oil does a 2002 Mercury Sable take?
What kind of oil does a 2008 Mercury Sable take?
5W-20
Engine Oil
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.5 quarts (with filter)After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
How do you reset the oil light on a 2008 Mercury Sable?
2008-2009
- Press and release the SETUP button until “System Check” is displayed.
- Press and release the SETUP button again to display “Oil Life = XXX% Hold Reset = New”
- Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%
How do you reset the oil light on a Mercury Sable?
Follow the instructions below to reset the Oil Change Required Light on your Mercury Sable:
- Turn the ignition key to the “ON” position.
- Press the SETUP button repeatedly until you see “OIL LIFE = XXX% HOLD RESET = NEW”
- Press and hold the RESET button “OIL LIFE SET TO 100%” is displayed.