Contents
How do you program a 2009 key fob?
PRESS and HOLD the Trip Odometer Reset Button for 3 seconds until “REMOTE KEY LEARNING ACTIVE” displays. Vehicle is now in Programming Mode. PRESS and HOLD LOCK and UNLOCK buttons at the same time on the first remote for 15 seconds. The vehicle will emit a sound indicating successful programming of the remote.
How do you program a Pontiac key?
How to Program a Pontiac Ignition Key
- Enter your car and insert your key into the ignition.
- Cycle the key in the ignition to the “On” position and leave it in that position for 10 minutes and 30 seconds.
- Cycle the key back “Off” within 45 seconds.
How do you reprogram a key fob remote?
How to Program a Key Fob in 5 Simple Steps (Car Key Guide)
- STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
- STEP 2-Press the lock button.
- STEP 3-Turn off the ignition.
- STEP 4-Repeat the process with other key fobs.
- STEP 5-Restart the process.
How do I relearn my GM key fob?
Press and hold the Vehicle Information button until the display reads “Press V to Relearn Remote Key.” If for some reason the display does not appear, restart your car, and repeat the previous steps. If the display still does not appear, contact your nearest GM car care professional.
How do you program a 2009 Toyota Corolla transponder key?
How to Program a 2009 Toyota Corolla Key
- Have your Corolla key on you and close all of the doors and windows of the vehicle.
- Lock and unlock the driver’s door with your key.
- Insert the key into the ignition and leave it there without turning until the security light turns on and remains on for 15 seconds.
How do you program a key fob for a 2008 Pontiac g6?
Press and hold the “Lock” and “Unlock” buttons on your remote for up to 30 seconds, until you hear another chime. This will indicate successful programming and you can remove the key from your ignition.
How do you program a key fob with only one key?
Close all doors, then open drivers door and press the Unlock button on driver’s door while it is open, insert key into ignition. (Off is the position where you can remove your key, RUN is the position just shy of starting your car.) 3. Within 10 seconds press any button on the first keyless remote to be programmed.
How to program the 2005 Pontiac Montana key fob?
Enter your 2005 Pontiac Montana with all of your remotes. This is important because all of the remotes will erase once you enter programming mode. Put your key in the ignition and remove it. Using the legend on the fuse panel as your guide, remove the “BCM PRGRM” fuse.
How to program the 2005 Pontiac Aztek key fob?
These models require you to go to a Pontiac dealership or a licensed Pontiac vendor such as an automotive locksmith to program your key fob. For the Aztek, Vibe and Montana, programming is easy to do yourself. Enter your 2005 Pontiac Aztek. Close all doors. Press and hold the “unlock” button on the driver’s door.
Where is the ignition key on a 2005 Pontiac?
Put your key in the ignition and remove it. Using the legend on the fuse panel as your guide, remove the “BCM PRGRM” fuse. You can access the fuse panel by opening the front passenger door. Close all of the doors and the lift gate. Insert your key into the ignition, and turn to the “ACC” position.