Contents
Are all ATX power supplies the same?
1 and v2. 2 specifications also increased efficiency requirements and mandated various other improvements. All ATX12V power supplies maintain the same physical shape and size as the ATX form factor.
Do I need an ATX PSU?
Judicious. No, you don’t need an atx power supply for atx motherboard. You do need an atx case to fit a atx motherboard.
Are power supplies standard size?
As for standards, most PSUs come in standard ATX sizes however, some powerful ATX PSUs tend to be longer than some ATX PC cases can support. For example, the Corsair 1200AX is 200mm long and is also an ATX standard PSU.
What standard ATX power supplies provide which voltages?
The ATX specification requires the power supply to produce three main outputs, +3.3 V, +5 V and +12 V. Low-power −12 V and +5 VSB (standby) supplies are also required.
How do I know what size power supply I need?
In most cases, to tell what size power supply you have, you’ll have to open up your PC case. That’s usually just a few screws around the back of the system, and then a side easily slides off. Then, you just need to look and see what wattage your power supply is.
How many pins do you need for an ATX power supply?
Most of today’s motherboards supply their CPU with a separate 12 volt cable, which has 4 pins for ATX style (sometimes called P4) or 8 or more pins for EPS and non-standard high-power systems. Some PSUs may have three or four 12 volt 4-pin connectors. The p/n for a standard P4 is 39-01-2040 or equivalent.
Can a MDD power supply be connected to an ATX PSU?
There are more 3.3V and 12V lines on the MDD PSU than are provided by the ATX PSU, so I’ve attached two MDD wires to one ATX wire in a couple of spots. The only issue I had here was the 4-pin extension.
What’s the difference between an ATX and ATX power supply?
Another ATX addition was the +5 V SB (standby) rail for providing a small amount of standby power, even when the computer was nominally “off”. There are two basic differences between AT and ATX power supplies: the connectors that provide power to the motherboard, and the soft switch.
What kind of power supply does a Mac G4 use?
I’ve just picked up a mirror-door G4 for cheap, sold as a “won’t power on” unit. After a quick test, and it does power up with a re-wired ATX power supply.