Contents
Is FX send stereo?
Aux sends are sometimes labeled with different names such as “effects send,” “FX send,” MON (short for “monitor”) or even “foldback,” but they all work the same way: They serve as a secondary output from a channel that routes the signal to a place other than the main left and right speakers.
What is FX in Behringer mixer?
FX send control per channel for internal FX processor and/or as external send. Main mix outputs plus separate control room, phones and stereo CD/tape outputs. CD/tape inputs assignable to main mix or control room/phones outputs.
Does the Behringer 1202 have phantom power?
The 12-input, 2-bus XENYX 1202 has 4 XENYX mic preamps with +48 V phantom power, making it possible to use 4 dynamic or condenser microphones. The 3-band British EQ ensures warm, musical sound every time.
What is aux FX?
An “Aux Send” is a type of output used on most live sound and recording mixers. It allows you to create an “auxiliary” mix in which you have individual level control over each input channel on your mixer to your “Aux Send” output. This allows you to add those effects to an output or channel on your mixer.
Are aux sends stereo or mono?
Each aux output is a mono send. The effects returns are stereo returns. This is quite normal because, typically, you’d be patching a stereo reverb across them: taking a mono input to the reverb and creating a stereo return signal, for example.
Is FX send mono or stereo?
The bus appears at the console’s FX send output and can be fed from there to an external effects device. The return from the effects unit is then brought back into the console on the stereo channels. Each FX send is mono and features up to +15 dB gain.
Are xenyx preamps any good?
The new mic preamps sound both very low in noise and uncoloured to my ears, and there’s also a sensible amount of headroom. Whilst only the main the inputs and outputs are balanced, hum and noise was not an issue, and the new EQ sounds pretty good, with a nice warmth and clarity to it.