How do I connect old speakers to my computer?

How do I connect old speakers to my computer?

How to Connect Old Stereo Speakers to a Computer

1. Attach the speakers to the amplifier with speaker wire, using the red wire to connect to the positive terminal and the other wire to connect with the black terminal.
2. Connect a set of RCA-type audio cables to a set of free audio input jacks on the back of the amp.

How do I connect speaker wire to my computer Jack?

Connect the sound cable with black connectors into the Rear Speaker Out port on the back of the computer. Plug the other end of the cable into the black port on the subwoofer, next to the green port. Connect the sound cable with orange connectors into the orange Center or Digital Out port on the back of the computer.

How do I connect external speakers to my desktop?

1. Locate the sound card jacks on your computer.
2. Plug one speaker into the other, if required.
3. Plug the speaker cable into the green “Line-out” jack of a desktop computer.
4. Plug the power cord from the speakers into an electrical socket and turn the speakers on.

How do I connect a wired speaker to my laptop?

In this article

1. Introduction.
2. 1Attach speakers to your laptop by plugging them into the appropriate connection on your CPU, laptop, or monitor.
3. 2From the Desktop, press Win+I.
4. 3Click Hardware and Sound; then click the Manage Audio Devices link.
5. 4In the resulting Sound dialog box, double-click the Speakers item.

How do I connect external speakers to my Dell desktop?

Most laptop computers have one headphone/microphone combo connector (Figure 2).

1. Verify that the speakers are powered on.
2. Connect the speaker or headphone jack to the ‘line-out’ or ‘speaker-out’ (green) connector on the computer.
3. Set the volume using the volume knob on the external speaker.

How do you hook up an audio device to a computer?

Plug your device into your computer. The device’s main unit (e.g., the headset or main speaker) should have an audio cable that plugs into your computer’s audio output port. If needed, first plug your device into an audio extractor.

What kind of cable do I need to connect my speakers to my computer?

Some common audio-out methods include the following: Optical – A pentagonal port. Optical cables will usually work with high-end, modern speakers. RCA – A red port coupled with a white port. These ports receive 3.5 millimeter cables of the same colors.

What to do with an old speaker wire?

Strip off any old speaker wire that may be green or brown with corrosion. If the speaker wire ends have RCA jacks — and the new receiver doesn’t incorporate those — cut them off. Strip back the speaker wire approximately 1/2 inch.

Where do I plug in my speakers on my computer?

Connecting speakers or headphones to a 3.5 mm mini jack On most portable speakers, the right-channel speaker is the “main” speaker with the volume knob, and it typically has two or more wires coming out of the back. In the back of the computer, connect the mini plug to the audio line-level output.