Contents
Can you use a powered subwoofer as a bass amp?
It is possible to use a bass amp as a subwoofer, however, bass amps aren’t designed to project the same depth of low frequencies as a subwoofer. Bass amplifiers mainly highlight the mid-range frequencies of a bass guitar, while subwoofers tend to focus heavily on the sub-bass frequencies.
Is a guitar amp a subwoofer?
Guitar amps will make very poor subwoofers. They are optimized for the range of frequencies that guitars produce, which doesn’t go very low!
How do I add a subwoofer to my computer?
Plug a 3.5mm to dual RCA cable into the yellow output. This is a center / subwoofer dual output, so either the white or the red RCA is now the subwoofer out. Set the computer up to output 2.1 sound, plug the white and red RCA plug in one at a time and see which one makes the sub put out sound.
Should I add a subwoofer to my stereo?
Subwoofers are used in most home theater systems, but subs can also radically improve the sound of stereo systems — and not just the ones with small speakers. So adding a sub is not just about adding more and deeper bass; rather, a properly integrated subwoofer can improve the overall sound of the system.
Can I play my bass through a guitar amp?
Yes, you can plug a bass into a guitar amp. While guitar amps aren’t designed to handle bass input, it will work. Plugging a bass guitar into an amp is simple as both bass and guitar use the same leads. Simply plugging your bass into the guitar amp’s input will work.
How do you hook up a subwoofer to rear speakers?
Some (many) powered subs have high level inputs, so you can just tap into the rear speaker wires. If your car has a factory sub, use its speaker wire instead. If it doesn’t have high level inputs, you can use a basic line out converter that ties into the speaker wires and turns them into a rca output.
Can a subwoofer be connected to a mixer?
It’s not ideal, but if you don’t use the headphone output on the mixer, just run a stereo 1/4″ to rca y-splitter cable to the rca inputs of the subwoofer. Otherwise, I’d have to agree that it would be more trouble/expensive than it is worth.
Can a subwoofer be connected to a PA?
Powered subwoofers also frequently include active crossover circuits, allowing you to connect the stereo mix straight from the board and then send the highpassed signal on to the rest of the PA.
How are powered speakers connected to Yamaha mixer?
I have two Alto TS210 Powered Active Speakers connected to Yamaha MG06 Mixer, which is then connected to my laptop via Stereo Y-Cable. That setup is working fine, however, I would like to now add a sub-woofer.
What kind of crossover do you need for a subwoofer?
Most powered subwoofers include active crossovers, but they tend to be simple and feature a fixed crossover point (usually around 100Hz). Outboard crossovers let you set the cutoff frequency and gain for each band. This makes outboard crossovers handy, even if you’re using active PA speakers.