Contents
What is the typical purpose of auxiliary sends?
An “Aux Send” is a type of output used on most live sound and recording mixers. It allows you to create an “auxiliary” mix in which you have individual level control over each input channel on your mixer to your “Aux Send” output.
What is a return in audio?
An auxiliary (aux) track accepts signal being sent to it from various different tracks; the main thing that differentiates it from a regular track is that you can’t record audio to it. This gives you control over the mix between the dry (original track) and wet (aux track) signals. …
What is return on a mixer?
In the latter case, the aux bus that feeds the effects processor is usually referred to as a ‘send’, while the mixer channel that receives the effect processor’s output will usually be called the ‘return’.
How does send and return work?
the send and return is for the effects loop, if you jack a cord out of the send jack and through some pedals and then back to the return those pedals will work beneath the amps ordinare controls, you can also use the send jack to plug in a recording device as you said.
Can you use aux sends for monitors?
To create a monitor mix, start by turning up one of the Aux sends on a channel strip. That sends the channel to an Aux Master, which is then sent to an output of the mixer and the stage monitor connected to the respective Aux output jack. You then need to balance the aux send levels to complement the performer’s needs.
Are aux outputs balanced?
Q: Are most aux inputs balanced or unbalanced connections? A: If the aux input carries a stereo signal on a single TRS jack, then it is almost certainly unbalanced. If, however, an aux input supports a stereo signal on two separate left/right jacks, then it is possible that it is balanced or unbalanced.
What is an AUX port and what’s it for?
It is an asynchronous serial port with an interface that allows the auxiliary input of audio signals for: It permits a PC or other device to transmit or receive data one bit at a time. The AUX port is typically used for audio equipment that receives peripheral sound sources, such as digital music players or audio speakers.
What does an aux return do in a mixing console?
This allows effect to be added to an audio source or channel within the mixing console. an Aux Return is a level-control-only input that generally feeds directly into the Mix Bus (rather than using up a fully-featured channel), and has no aux send from it (automatically preventing feedback through the device).
Where does the aux send signal come from?
An aux-send (auxiliary send) is an electronic signal-routing output used on multi-channel sound mixing consoles used in recording and broadcasting settings and on PA system amplifier-mixers used in music concerts. The signal from the auxiliary send is often routed through outboard audio processing effects units (e.g., reverb,…
What’s the difference between a return track and an aux track?
If you ever hear someone use the term “return track,” they’re referring to an aux track. In Ableton, aux tracks are called return tracks and it’s acceptable to use the two terms interchangeably. 3. Sends A send is a knob or fader within your DAW that allows you to send varying amounts of a regular track’s signal to an aux track.