Contents
What is insert on sound mixer?
Think of an insert as a signal detour. The insert serves simultaneously as both an input and an output for either a single channel or for some other signal path, such as a submix or main output bus. On a digital console, it is typically accomplished internally in the virtual portion of the audio console.
What is an insert on a mixer used for?
In audio processing and sound reinforcement, an insert is an access point built into the mixing console, allowing the audio engineer to add external line level devices into the signal flow between the microphone preamplifier and the mix bus.
How do inserts work on an audio interface?
An insert is a way of patching a piece of gear after a microphone preamp, but before any other processing. The idea is, if you want to go into the interface’s preamp, then compress or EQ in the analog domain, you’d go out of the insert, into the gear, back into the insert.
What is the difference between sends and inserts?
An insert is like putting a plug-in directly on the track. With a send, you take the track, and you route a sort of copy of the track to an auxiliary channel, and put your effects there, on that channel.
How does an insert cable work?
A cable that splits a TRS plug to two TS plugs, with separate signals carried on the two split plugs. Insert cables are often used to access the send/return on a mixer insert, but have other uses as well, such as splitting a stereo output carried on a single TRS jack to separate left/right signals on TS plugs.
What is an insert Jack?
An Insert Jack is a TRS (Tip-Ring-Sleeve or 1/4″ stereo) jack that is typically used to connect a signal processor to only affect a single mixer channel. An example would be a compressor or noise gate that might be connected through the Insert Jack of a mixer channel to only affect a single vocal mic.
What are effect sends?
What’s a send effect Send effects are used when you have an original signal that you want to modulate, modify or process in any way without affecting the original signal. Your original signal sits there by itself unchanged but it has a separate copy being effected.
What is insert send and return?
Inserts are patchpoints that interrupt the signal flow in a mixer. An Insert Send takes the signal and sends it somewhere else to be processed…and then returns (Insert return patchpoint) it right back to the mixer at the same point it was taken from.
Where to find inserts in monoaural mixer inputs?
Inserts might be found on monoaural mixer inputs, monoaural and stereo subgroups, auxiliary inputs, main outputs and matrix outputs, but are rarely found on stereo line level inputs.
What does an insert do in a mixing console?
In audio processing and sound reinforcement, an insert is an access point built into the mixing console, allowing the audio engineer to add external line level devices into the signal flow between the microphone preamplifier and the mix bus.
What kind of inserts do you use in a mixer?
Typically, higher-end mixers will have balanced inserts and entry level mixers will have unbalanced inserts. Balanced inserts appear as a pair of jacks, one serving as the send (out from the mixer) and the other serving as the return (back to the mixer.) Balanced insert jacks can be XLR, 1/4″ TRS phone connector or Bantam TT.
What does insert mean in audio effects processing?
Insert (effects processing) In audio processing and sound reinforcement, an insert is an access point built into the mixing console, allowing the audio engineer to add external line level devices into the signal flow between the microphone preamplifier and the mix bus. Common usages include gating, compressing,…