How do you build a fireplace mantel beam?

How do you build a fireplace mantel beam?

Instructions:

1. Step 1: Cut 45• miter cuts at each end on two of your 1x8x6 boards.
2. Step 2: Glue and nail the boards in place.
3. Step 3: Measure and cut your end caps to size.
4. Step 4: Distress your beam.
5. Step 5: Fill the wood seam with wood putty.
6. Step 6: Sand your beam.

How do you finish old beams?

For a traditional oak beam finish, beeswax polish is a far better alternative. This can be purchased or made by dissolving beeswax in turpentine overnight. Beeswax polish should be applied as a thin coat and polished to a shine. A thick coat will stay soft on the surface of the wood and give it a dull appearance.

How do you refinish a mantle?

Sand the entire mantel with medium-grit sandpaper followed by fine-grit paper until it is smooth and free of imperfections. Sand with the grain of the wood. Fill cracks and holes with wood filler that matches the color of your stain. Wipe the surface clean with a tack cloth.

How do you finish a rustic beam mantel?

While it is common to leave the mantel unfinished and show the natural tones found in the wood itself, you can also finish the mantel using a wax finish to enhance the look. Wax is a great option due to its natural feel, as well as the ability to touch it up should it ever get a dent or scratch.

What can I do with old barn wood?

Here are 34 DIY reclaimed wood ideas for you.

1. Up-cycled Pipe and Wood Shelves.
2. Magically Rustic and Reclaimed Fairy Garden Planter Box.
3. Reclaimed Wood Farmhouse Dining Table.
4. Shabby Chic Bathroom Organizer.
5. Rustic Chevron Wooden Wall Art.
6. Rich and Earthy Bedroom Headboard.
7. Industrial Farmhouse-Style Pendant Lighting.

How do I replace my mantle?

Here’s how to replace your fireplace mantel in a few easy steps.

1. Step 1 – Remove the Old Fireplace Mantel.
2. Step 2 – Measure.
3. Step 3 – Purchase a New Fireplace Mantel.
4. Step 4 – Attach the Support Ledger.
5. Step 5 – Prepare the New Mantel.
6. Step 6 – Attach the Mantel to the Support Ledger Board.
7. Step 7 – Secure the Mantel.

How do you seal exposed beams?

If a colour change is required, a wood stain such as Manns Classic Oak Stain can be used, or alternatively any other suitable product from our wood stain range. The beams should then be sealed with a wood wax, oil or varnish, depending on the desired result.

How do you protect exposed wood beams?

Wood shields. In this case, a 3/4 inch plywood or an inch stock is glued or nailed on the exposed surface of the wood beam. The wood cap is always independent of the wood beam and it offers utmost protection to the beam. The cap directs away water from the sides of the wood beam.

What color should a mantle be?

The general rule of thumb is for a fireplace mantel to be a neutral color. This ensures the mantel will blend with the room even if the colors are changed. Likewise, it keeps the mantel from standing out too much. If you want to paint your mantel, white and off white colors like ivory are generally a good choice.

Are there fireplace mantels from old barn beams?

In this collection of pictures, there’s an original old barn, a couple pictures showing the big beams in the barn as well as a couple pictures of the resulting finished mantel at our shop and then in its final home. We have lots of fireplace mantels that are pre-finished and ready to ship.

How do you level a floating barn beam mantel?

(If your 2×4 isn’t the same length as your mantel.) We measured the height of the bracket back bar + the distance from the edge of my tape to the first rod, to know where to place the template onto the mantel. Using your template, place the 2×4 onto the mantel and level it with a long level.

What do you use to make barn mantels?

To make our mantels, we take these old beams from the barns. We spend a great deal of time hand sanding the mantel with orbital and small belt sanders. We don’t use big sanding machines because it would be too easy to go through the old character and into almost modern looking new wood.

How big is a floating Mantel for a barn?

Our barn beam weighs approximately 80 lbs, without adding any decor! So I wanted to ensure that it would be able to withstand the weight. We purchased our floating mantel bracket from Shelfology. They had many size options, so we selected the one that fit our barn beam best.