Contents
- 1 How thick should plywood be for bookcase?
- 2 What kind of plywood do you use for built in shelves?
- 3 How much weight should a bookshelf hold?
- 4 Can a bookshelf hold a TV?
- 5 What kind of wood should I use to build a bookshelf?
- 6 How big of a piece of plywood do you need for shelving?
- 7 How big should the partition be for a bookshelf?
How thick should plywood be for bookcase?
¾-inch
First and foremost, the wood you use for making bookshelves will impact the design as well as the cost of your project. ¾-inch plywood is considered the industry standard, thanks to it being strong yet inexpensive—especially when compared with some solid woods.
What kind of plywood do you use for built in shelves?
Plywood that has a hardwood veneer is not only less expensive but in many cases stronger than solid softwoods like pine. Most lumberyards stock the basics: birch, maple, and oak veneer plywoods. Birch is the best wood to use if you plan to paint your bookcase, and maple lends itself to a variety of stains.
How much weight can plywood shelves hold?
However, of the types of pressed wood, the best wood for bookshelves and kitchen shelves is plywood, according to the team at Bob Vila. A 30-inch-wide shelf that’s 10 inches deep and made of plywood can bear 35 pounds per foot with acceptable sag, or about 90 pounds for the entire shelf.
How much weight should a bookshelf hold?
The short answer is that the supported weight depends primarily on the brackets that hold the shelf. If installed correctly according to the manufacturer’s directions, they’ll hold the specified maximum weight ranging from 20 lbs to 600 lbs or more.
Can a bookshelf hold a TV?
Because they aren’t meant to hold a TV, most bookshelves are not equipped with wire management holes like entertainment centers are. Because of this, be sure to select a bookshelf with a backing that you will be able to poke holes into or that you can leave off completely.
How thick should a floating shelf be?
What Size Floating Shelf Bracket Do I Need?
| Thickness of Floating Shelf | Height of Bracket Backplate |
|---|---|
| 2 to 2 ½ inches | 1 ½ inch backplate |
| 2 5/8 to 3 ¼ inches | 2 inch backplate |
| 3 ½ to 4 ½ inches | 3 inch backplate |
| For Thicker Shelves | Contact for Custom Backplates |
What kind of wood should I use to build a bookshelf?
You can also make a bookshelf to your own specifications rather than having to settle for store-bought versions. Using plywood can save you some money, and bookcases and shelves made from this material need to be built properly to stay strong enough to hold your books.
How big of a piece of plywood do you need for shelving?
The most common size used in shelving is a 3/4 inch thickness. Cabinetry, furniture, and smaller decorative projects might generally use a combination of 1/2 and 3/4 and occasionally 1/4 inch.
How big is a sheet of plywood in inches?
Plywood is most commonly sold in 4×8′ sheets of varying thicknesses. The most common are 1/4, 1/2, and 3/4 inch sizes or a close equivalent (3/8″, 15/32″ or 12mm, 23/32″ or 18mm). Hardware stores are now carrying “project panels” as well.
How big should the partition be for a bookshelf?
If you have drywall with wood framing, you probably won’t hit a stud as you try to screw the partition cleats to the wall (Photo 7). Before fastening the wall cleats, screw a 1×2 cleat to the ceiling so the front edge is 10-1/2 in. from the back wall.