What kind of plywood do you use for van walls?

What kind of plywood do you use for van walls?

As with every part of the van build process, there are many different options to choose from for walling material. For our van, we decided to go with 1/4” birch plywood because it’s flexible, easy to work with, and has a nice grain pattern.

What type of plywood is used for van subfloor?

We would suggest you use 1/2″-3/4″ plywood. Plywood is stronger than OSB, so if you do go with OSB be sure to use at least 5/8″. If you plan on using a “glue-down” flooring, you will want to use plywood for proper bonding.

What is the best wood for van conversion?

Paulownia, the Best Wood to Make the Furniture for your camper Van. As we have seen, Paulownia is the lightest wood we can find to camperize a van without losing any of the properties needed, these being screwing, painting and mechanize.

What should I line my van walls with?

Tongue And Groove Walls Pine and cedar panelling are both solid options for your van build. As mentioned above, cedar panelling will set you back more but looks amazing and is resistant to mould and mildew. Pine, on the other hand, costs less, looks great and delivers on durability, too.

How thick should plywood be for a platform bed?

Plywood thinner than 3/4 inch should not be used, as it will not be strong enough to hold the weight of a bed mattress and a person lying down. The plywood can be exactly 3/4 inch thick, but ideally, it should be thicker.

How do you subfloor a van?

Creating a Campervan Subfloor in 8 Easy Steps

1. Step 1) Empty and Sweep the Van Floor.
2. Step 2) Scrub Campervan flooring with Soap and Water.
3. Step 3) Get Rid of Rust & Covering Holes.
4. Step 4) Spray Scratches with Rustoleum.
5. Step 5) Adding a Sound Dampener.
6. Step 6) Add 2×2’s and XPS Insulation.
7. Step 7) Make a template.

How do you line a van wall?

How To Line Your Walls With Plywood

1. Optional.
2. Hold cardboard up to your target section, measuring and marking its dimensions.
3. Cut a cardboard template.
4. Test your template, trimming where necessary to get as flush a fit as possible.
5. Once you’re happy with it, trace your template onto plywood sheeting.

What kind of plywood do you use to frame a van?

To attach the plywood to our van’s metal framing, we picked up some 3/4” self-tapping sheet metal screws. These screws went right through the plywood and into the frame without drilling pilot holes. The great thing about 1/4″ plywood is that it’s somewhat flexible, so it will follow the curved contours of a van body.

What kind of plywood do I need for a VW Transporter?

The wood used and the glue is 90% of the time identical Having pondered it a bit I am just going to get standard exterior grade plywood. I just dont see it getting enough wetness for it to cause damage.

What kind of flooring should I use for my van?

We would suggest you use 1/2″-3/4″ plywood. Plywood is stronger than OSB, so if you do go with OSB be sure to use at least 5/8″. If you plan on using a “glue-down” flooring, you will want to use plywood for proper bonding. Furring strips are used to allow room for under floor insulation to keep you warm in your vanlife travels.

How do you make a subfloor in a camper van?

Using a 2″ holesaw, we made a hole in our subfloor and final floor to keep this accessible. We cut the 4×8 sheets of ½ inch plywood to size using a circular saw. We left approximately 1/16″ inch of space between each plywood sheet, and between the plywood and the van walls.