What should I coat my table saw top with?
Using paste wax is the best way to lubricate the top of your table saw, which will help wood pieces slide across more smoothly when making cuts. First wipe on a light coat of paste wax all across the top surface of the table saw, making sure to cover all areas that come in contact with wood when you use it.
How do you remove rust from a table saw top?
Scour the surface with mineral spirits and synthetic steel wool or 400-grit wet-or-dry sandpaper. Wipe off the surface with a clean cloth, and repeat as necessary. Even when rubbed with paraffin wax, the cast-iron top on a new tablesaw may tarnish and start to rust.
What should I use to protect the top of my table saw?
For years I’ve used Bostik TopCote (apparently now called GlideCote) to protect the cast iron top of my table saw. It has always worked very well: I have no rust on the top, and it provides a nice slick surface. But now my can is empty!
How to keep your table saw surface clean and rust-free?
Lower quality tools may have tables made from steel or even aluminum, and while protecting these surfaces is not going to prevent rust, there is still merit to keeping the table surfaces clean and slick. The monthly waxing routine is a good idea for any stationary tool with a metal table surface.
What’s the best way to clean a table saw?
Your best bet is always to consult your manual for the manufacturer’s recommendations. Once you have access, you want to start cleaning. The goal is to remove as much saw dust and other debris as possible. Stiff bristle brushes and a shop vac are the standard tools. Don’t just target moving parts, but all surfaces.
How do you remove rust from a cast iron table saw?
Wipe off the surface with a dry, clean cloth or some paper towel to eliminate residual particles. Repeat this step as necessary. If the rust is deep and heavier, you may use an orbital sander to help with the scrubbing to remove surface rust from cast iron table saw. Naval jelly is a gloopy, thick jelly made of Phosphoric acid.