What is a bench hook in printing?
A printmaking bench hook is a board that holds your carving plate for you, keeping your fingers out of harm’s way. It catches on the edge of your desk (i.e. kitchen table) and cradles your plate in its corner, so you don’t have to hold it.
How do you use a bench hook?
To use a bench hook, place it on the edge of the workbench as shown. One fence faces downwards and acts to secure the hook on the workbench. Place the work against the upper fence and lean on the piece slightly. Your weight should easily hold the work steady.
When would you use a bench hook?
One of the main uses of a bench hook is for holding workpieces when sawing tenons for mortise and tenon joints. Bench hooks with slots in the stop angled at 45 degrees are used for sawing mitre joints. See our section: How to cut mitres using a bench hook to hold the wood for more information.
How does a bench hook look like?
Although the tool is called a bench hook and does have a part that is called the ‘hook’, it does not look like a traditional hook. It is the forward pressure of the woodworker’s hand on the workpiece and the forward cutting action of the tools used to work the wood that hold the bench hook in place.
What is a bench vice for?
What is a bench vise? To state in simple terms, a bench vise is a mechanical apparatus used to secure an object that is to be worked on. It features two parallel jaws as part of the design. The device is widely used in the mechanical and woodworking industries, among others.
Where would you put a bench hook?
Usually a bench hook is used with a backsaw, such as a tenon saw or dovetail saw. In use the bench hook is laid flat onto the workbench, so the hook is sitting over the front of the bench. With one hand the woodworker holds the workpiece firmly against the fence.
How do you make a hook for a bench?
To make this simple bench hook find a plank for the platform and determine how long you’d like it to be. Cut the hook to the width of the platform and the fence slightly shorter than the platform. Next, fasten them together with wood glue to opposite ends and sides of the platform as shown in the picture.
How do you pick a bench vice?
While selecting a bench vise, you have to check its throat depth – this is the distance from the top side of the jaw to the top of the slide below the jaw. Larger throat depths mean you can hold larger workpieces. Bench vises have varying jaw widths. For larger objects, you need bench vises that have bigger jaw widths.
Do you need a bench vise?
Working with a Drill A vise is absolutely vital when performing a task like drilling that requires serious precision and stability. Using a bench vise will allow you to drill holes with more accuracy than you would be able to get without using one.