Contents
How do you seal Ambrosia Maplestory?
Maple Finishing Tips Coat it with a clear, water-based finish. Be sure to damp-sponge the wood to lift the grain, then sand, both before and between coats. Give maple an aged look with dye and an oil/varnish mix. Sand to 220 grit, wipe off dust, then damp-sponge the wood and sand as above.
Can you stain ambrosia maple?
Wormy maple = Ambrosia maple. The wood is naturally light in color so a stain isn’t needed and defeats your purpose of highlighting the character of this wood.
What is the best finish for hard maple?
Another commonly used finishing technique on maple is to apply tung oil or linseed oil after the final sanding. These oils tend to bring out the curly or tiger looks of the maple. Follow the oil with a coat or two of shellac. For a more durable finish, top-coat over the shellac with a clear lacquer or polyurethane.
How strong is ambrosia maple?
Ambrosia Maple is used most for furniture making, paneling, veneering, joinery and Ambrosia maple flooring. Ambrosia Maple has a Janka hardness rating of 950.
Is Ambrosia Maple hard or soft?
Wormy Maple (sometimes called “Ambrosia Maple”) is a grade of Soft Maple, specifically selected and sorted to show mineral streaks and color variations caused by the Ambrosia beetle. The beetle infests the live Maple tree, depositing larvae that bore small “worm holes” and discolor the wood. No two boards are alike.
What stain looks good on Maple?
Top 7 Best Stain for Maple Wood| How to Stain Maple Dark
- Minwax Pre-Stain Wood Conditioner.
- Varathane 211759 Premium Wood Stain.
- Minwax Wood Finish Penetrating Stain.
- General Finishes Water-Based Wood Stain.
- Minwax 61350444 Polyshades Stain & Polyurethane.
- Rust-Oleum Ultimate Wood Stain.
- Minwax Gel Stain.
What kind of stain do you use on maple?
Because maple has such tight grain, pigment type stains don’t soak into the wood, except where there is a spot with more open grain. Try using dyes, such as TransTint or Transfast. There are other brands as well often marketed as aniline dyes.
Is wormy maple good?
The wood is strong and stiff, but has a relatively low shock resistance. Janka hardness is 940. Wormy Maple is common in fine, hand-crafted furniture, guitars, and ornamental turning—and is a beautiful choice for unique doors and other millwork products manufactured by Sun Mountain!
What is ambrosia maple used for?
| Ambrosia Maple | |
|---|---|
| PHOTO | |
| USES | Suitable for furniture, joinery, ambrosia maple flooring,, turning, paneling, veneering. |
| COMMENTS | The Ambrosia beetle that carries in the Ambrosia fungus on its feet into the wood (the fungus is food for the insect’s offspring when they hatch). |
Is Ambrosia Maple rare?
Re: Ambrosia Maple We buy a decent amount of ambrosia or wormy maple logs and they are much more rare here than clean red maple.
Does gel stain work well on maple?
Gel stain is particularly forgiving with splotch-prone woods like birch, cherry, maple, and pine. These varieties tend to absorb thin traditional stains unevenly, looking messy and unfinished no matter the number of thin coats, but accept gel stains easily.
Why are the leaves on my Ambrosia Maple turning darker?
“Ambrosia maple” is, as I understand it, a form of spalting caused when insects burrow into the tree and introduce a fungus. It produces darker stains through the light-colored wood, roughly following the grain direction, ranging from a few isolated streaks to a chaos of overlapping “brush strokes”.
Where can I find a sample of Ambrosia Maple?
Images: Drag the slider up/down to toggle between raw and finished wood. A special thanks to Mike Leigher for providing the wood sample of this wood species. Watch video of wood finish being applied.
What do the stains on ambrosia wood look like?
(See image 1) The figure pattern can be mild or dense, depending on the degree of infestation. Ambrosia maple also is called “ghost” maple, because the stains look like ghosts suspended in the board and the larvae tunnels appear to be eyes.
What does Ambrosia mean in terms of beetles?
“Ambrosia” is a term that’s commonly applied to lumber from eastern red and silver maples that has streaks of color caused by an infestation of the ambrosia beetle. But “ambrosia beetle” really is a generic term for many different types of beetles whose larvae bore into trees and deposit a fungal symbiont into the wood.