How do you make a saw blade last longer?

How do you make a saw blade last longer?

Hang Circular Saw Blades Through the Center Hole Don’t let the blade’s kerf rest on the ground but hang a blade through its center hole for temporary storage. This can be as simple as a nail or screw in the wall, but at least the blade won’t be dulled by the floor or a shelf.

Why do we need to maintain the saw blade clean and keep dry?

The best tools are the ones you don’t have to replace. When it comes to saw blades, cleaning and maintaining parts is the best way to prevent rust and keep your equipment running smoothly. This dry lubricant reduces wear on saw blades and dries quickly to prevent sawdust and dirt from sticking to parts.

What regular maintenance and care does a circular saw need?

BE A DETECTIVE—the first step in maintaining a circular saw

• Check Power Source. After disconnecting your saw’s power, make sure the power connection is free of flaws.
• Inspect Moving Parts.
• Examine the Housing.
• Assess the Handle.
• Test the Lower Guard.
• Remember Blade Washer and Bolt.
• Air Vents.
• Switch Levers and Guards.

Should I lubricate my circular saw blade?

Circular saws can be used for all types of wood product cutting–lumber, plywood and paneling. The saws can cross-cut and rip cut. The blade doesn’t need to be oiled very often; you can coincide the oiling with blade replacement, but a spot of oil on the inner washers will keep the saw running better and more safely.

What should I put on my saw blade after sharpening it?

After each use, lubricate your blade with gun oil, paste wax, or WD-40 before storing. Gun oil or WD-40 can be wiped on with a rag. Paste wax should be wiped off after sitting on the blade for a few minutes. All of these choices prevent rust and help the saw blade slide through the wood.

What should I do if my saw blade is not cutting well?

Speaker: If your blade isn’t cutting well, try cleaning it. When we cut wood, the blade develops enough heat to melt pitch deposits in the wood and those get baked onto the blade over time. Let me show you the brown, burnt on the evidence here on this blade.

What should I put on my saw blade to prevent rust?

Gun oil or WD-40 can be wiped on with a rag. Paste wax should be wiped off after sitting on the blade for a few minutes. All of these choices prevent rust and help the saw blade slide through the wood.

Why do you need to clean a circular saw blade?

Why You Should Clean a Saw Blade. This effectively coats the edges, making the blade act as though it is dull. Friction and heat increase, cutting is more difficult, and the resulting cut edges are not as clean as they could be. While it may seem counterintuitive, dull blades are more dangerous than sharp blades.