Contents
Are SWR meters frequency specific?
You are correct – they are designed to cover specific frequency ranges. If you are (or know someone who is) handy with a soldering iron – you can modify a CB SWR meter to cover the range 1Mhz to well above 1Ghz at low power.
Can you use a ham radio as a CB?
Can ham radio be used as a CB radio? Generally, the answer is no. If a licensed amateur radio operator wanted to speak on a CB frequency range, the operator would need to use a CB radio. That said, amateur radio can be used in many applications where people currently use CB radios.
Do you need an SWR meter?
To tune your antenna, you will need to use a SWR meter. This device is attached between your antenna and radio. This device measures the amount of signal being reflected into your transmitter to help you measure the quality of your outgoing broad cast as well as any potential threat to your radio.
How does SWR meter work?
A directional SWR meter measures the magnitude of the forward and reflected waves by sensing each one individually, with directional couplers. A calculation then produces the SWR.
Which is the best SWR meter for ham radio?
The DAIWA CN-501H is another very high-quality SWR and power meter. It works with a great accuracy both for SWR and power readings, at least until you don’t go too high especially with the power. It works great for HF and VHF, unlike many other SWR meters that struggle with HF.
Which is more accurate a SWR meter or CB meter?
The reading you see on the meter will be very close to your real SWR. The closer to 1:1 your SWR is, the more accurate it will be. It would be more convenient to have a real SWR meter or antenna analyzer if you do a lot of testing, but for a quick antenna check after a mobile install or whatever, the $5 CB meters work OK.
Do you need a SWR meter for a 2m antenna?
Yes and no. I use a CB SWR meter to check 2M antennas all the time. There is a trick to it however. If all you want to to is check SWR on your 2M antenna, you don’t necessarily have to buy a dedicated VHF/UHF SWR meter. What I keep in my toolbag for that is a cheapie $5 hamfest special CB SWR meter.
Is the HF SWR meter connected to the unknown antenna?
One quick question.When setting the hf swr meter up in the forward power position is the swr meter connected to the antenna of unknown swr or to a 50 ohm dummy load as usual? Thanks Thomas Reply Dan KB6NUsays January 18, 2009 at 11:08 pm