Contents
Can a pca9685 PWM drive a servo?
The PCA9685 PWM driver board comes to the rescue! This driver board can generate up to 16-channels (or 8-channels in FeatherWing form) of PWM signals–perfect for driving many servos! This guide explores how to use the PCA9685 PWM & Servo driver with CircuitPython and MicroPython.
What’s the logic power pin on a pca9685?
VCC – This is the logic power pin, connect this to the logic level you want to use for the PCA9685 output, should be 3 – 5V max! It’s also used for the 10K pullups on SCL/SDA so unless you have your own pullups, have it match the microcontroller’s logic level too!
How to use the pca9685 driver for CircuitPython?
Check out the PCA9685 driver guide for CircuitPython and Python usage: https://learn.adafruit.com/16-channel-pwm-servo-driver To use the PCA9685 with your Adafruit CircuitPython board you’ll need to install the Adafruit_CircuitPython_PCA9685 module on your board.
What kind of pins do you need for a pca9685 breakout?
If you’re using a PCA9685 breakout you’ll need to connect its I2C and power pins as follows: Board SCL / I2C clock to PCA9685 SCL. Board SDA / I2C data to PCA9685 SDA. Board 3.3V power to PCA9685 VCC.
What is the optional power pin on Adafruit?
V+ – This is an optional power pin that will supply distributed power to the servos. If you are not using for servos you can leave disconnected. It is not used at all by the chip. You can also inject power from the 2-pin terminal block at the top of the board.
Can you use a pca9685 sensor in Python?
It’s easy to use the PCA9685 sensor with Python or CircuitPython and the Adafruit CircuitPython PCA9685 module. This module allows you to easily write Python code that control servos and PWM with this breakout.
What can a pca9685 be used for?
Each channel of the PCA9685 can be used to control the brightness of an LED. The PCA9685 generates a high-speed PWM signal which turns the LED on and off very quickly. If the LED is turned on longer than turned off it will appear brighter to your eyes.