Contents
Can a Raspberry Pi connect to multiple VLANs?
If you have multiple VLANs, you can just add them all to that same vlan file, following the same format. If you’re using a DHCP server to dynamically assign IP addresses, you’re now done. If you’re not, or instead wish to use a static IP address, read on.
Where do I find the physical NIC on a VLAN?
By convention, a VLAN’s virtual NIC should follow the naming convention: Where physicalNIC is, just as the name sounds, the physical NIC found by running ifconfig. If you are unsure how to find the name of your physicalNIC, please see step 2 in my guide on how to set up wake-on-LAN here.
How to make a network on a Raspberry Pi?
I would like to have a network for 10+ Pi with a switch (192.168.42.x). This switch is connected to Internet via one port (to an another switch). I try to have one Pi with the ip (eth0) 192.168.1.127 (which is connected to internet) and a virtual ip like 192.168.42.1 to connect to the other Pi (and they will have Internet via Pi #1)
Can a Raspberry Pi interface be connected to two subnets?
An interface cannot be connected to two subnets, except with vlans. You tried this with an additional ip address on the interface. A second ip address can only be set from the same subnet the interface is connected to, in your case either from 192.168.1.0/24 or from 192.168.42.0/24.
How to change VLAN # on Raspberry Iwan?
THIS EXAMPLE USES VLAN4, BUT WHEN TESTING IN THE NETWORK THE VLAN# NEEDS To BE CHANGED WITH THE ONE TRUNKED Make sure there a TV / Monitor, the power, a keyboard and the network is connected to the RPi1-XX when the RPI1-XX is rebooted the module is not loaded automatically.
How to configure two wireless networks on Raspberry Pi?
As a side note, if you want to configure two (or more) wireless networks you can do so by adding an id_str to each like this: When booted, the Raspberry Pi should associate with either network. Additionally, if both networks are present you can add a priority key, and the network with the highest priority will be used first.
Can a Raspberry Pi be used as a router?
When you have only one cable available on your Raspberry Pi and you want to test something out with multiple networks this can be done with adding a tagged interface to your Raspberry on-board interface. We can also call this a Raspberry on a stick configuration (this will only makes sense to people who knows what a router on a stick is)