Can a router ping another router?

Can a router ping another router?

Between router to router, they can ping each other successfully. Between computers on the same switch, they can ping each other successfully.

Why can’t I ping a device on my network?

According to users, if you’re unable to ping other computers, the issue might be related to your network. To fix the problem, be sure that your PCs are properly connected and able to access the Internet. In addition, you might want to try restarting your network devices and check if that solves the issue.

How ping works from one network to another?

The ping command first sends an echo request packet to an address, then waits for a reply. The ping is successful only if: the echo request gets to the destination, and. the destination is able to get an echo reply back to the source within a predetermined time called a timeout.

When you ping from a router to another router and receive back this mean?

PING – You can use the PING command to send test packets to a particular device. If you get a response back, you know there is a physical connection between the two devices. If no response is returned, this could indicate a problem with the physical connection.

What is ip route command in Cisco?

IP route command is used to configure the static route. Static routes are the most secure way of routing. They will also increase overall network performance.

Can ping but Cannot connect to server?

This issue is typically caused by a problem with domain name server (DNS) resolution because the Internet service provider’s DNS servers are unavailable or a problem with the security software (usually a firewall) running on the computer which is attempting to access the Internet.

Why can’t I ping my own IP?

You may not (probably won’t) be able to ping that internal address from outside the network (e.g. a device on the internet), assuming that your internet gateway (router, modem etc) has a stateful firewall you haven’t setup port forwarding to forward ICMP Echo Requests to a device inside your network (which would be a …

Can ping one way but not back?

If a ping works one way, then it is almost always the firewall on the end of the connection that can initiate the ping successfully. In order for a ping to work, it must receive back an echo-reply, which means that traffic is in fact coming back to the sender.

Can ping only be on one side?

Check your router’s firewall settings. You may have a firewall rule that blocks ICMP to one IP address, especially since default rules are often just guides, they will usually only apply to a single address instead of a range.

How can we check if a device router/switch is reachable remotely which command can we use?

When a switch is reachable from another switch, you can test connectivity by using the ping command in privileged EXEC mode.

What happens when you ping an IP address?

The “ping”—a data packet—is sent out to an IP address. Transmitted over the network’s switch and router, the data packet arrives at the device with the specified address. If the ping doesn’t receive a response, the request times out, and the device that sent the ping gets an error message or notification of data loss.

How to solve Packet Tracer problem with Ping community?

This is required in order to have inter-Vlan routing 2. The IP address spaces of Vlan 70 and 60 were overlapping, as were the IP address spaces of Vlan 10 and 30 3. The switches need a default gateway Find attached the corrected, working file that should provide end to end connectivty.

Can a Cisco router Ping a PC IP address?

The Switch can ping each PC’s IP address. The Router can also ping each PC’s IP address. However, the problem is that the PC’s can’t connect to one another. They can’t ping one another.

Why is my switch not pinging my router?

You can’t ping because your devices are in different networks. Switch has a VLAN 1 SVI in network 192.168.10.0/24 and router is in 172.16.10.0/24 network. For switch to be able to reach a remote network (in which router resides) it needs to have a gateway that resides in its own network – 192.168.10.0/24.

Why are my PC’s not pinging one another?

The Switch can ping each PC’s IP address. The Router can also ping each PC’s IP address. However, the problem is that the PC’s can’t connect to one another. They can’t ping one another. I know this is going to end up being something trivial that’s holding me back, but I need the help. I’ll appreciate it!