Contents
Can I bundle two different type of interface Ex A Fastethernet with Gigabitethernet?
Yes, we can make. Can I bundle two different type of interface ex. a fastethernet with gigabitethernet?
What type of interface represents an EtherChannel as a whole?
logical port-channel interface
In this case, neither PAgP nor LACP packets are sent or received. As ports are configured to be members of an EtherChannel, the switch automatically creates a logical port-channel interface. This interface represents the channel as a whole.
How many interfaces can be in a port channel?
16 interfaces
Link Aggregation Control Protocol (LACP) lets you configure up to 16 interfaces into a port channel. A maximum of eight interfaces can be active, and a maximum of eight interfaces can be placed in a standby state.
What is the maximum number of interfaces that can be aggregated with EtherChannel?
For a PAgP EtherChannel, you can configure up to eight ports of the same type and speed for the same group. For a LACP EtherChannel, you can configure up to 16 Ethernet ports of the same type. Up to eight ports can be active, and up to eight ports can be in standby mode.
Is the EtherChannel configured on the interface?
Off: No EtherChannel configured on the interface. There is a small topology in which 2 switches S1 and S2 are connected with each other and we have to bundle these two links into a single logical link. Here, user has used the mode desirable and switchport mode trunk.
What do you need to know about EtherChannel?
EtherChannel is a port link aggregation technology in which multiple physical port links are grouped into one logical link. It is used to provide high speed links and redundancy. Maximum of 8 links can be aggregated to form a single logical link. Need of EtherChannel –
How many links can be aggregated in an ether channel?
Last Updated : 09 Aug, 2019 EtherChannel is a port link aggregation technology in which multiple physical port links are grouped into one logical link. It is used to provide high speed links and redundancy. Maximum of 8 links can be aggregated to form a single logical link.
Is the eth0 interface still up in Linux?
As shown below, the eth0 is down, but the network connectivity to the machine is still not lost, as we’ve setup bonding, and the eth1 interface is still up. If you enjoyed this article, you might also like..