Can I record acoustic guitar with SM58?

Can I record acoustic guitar with SM58?

You can use an SM58 for recording guitar with great results. It is particularly good for recording from a guitar amplifier due to it being a robust dynamic microphone that can deal with high volumes. Whilst it also works well for acoustic guitar a condenser microphone is usually the preferred option in that situation.

How do you record like a pro?

Step-by-Step Vocal Recording Checklist

1. Before the session, choose a room with very little reverb.
2. Use some acoustic treatment.
3. Set up your equipment.
4. Get a rough headphone mix going.
5. Position the singer 6 inches away from the microphone.
6. Add a small amount of reverb to the vocal.
7. Get the vocalist to warm up.

What level should I record acoustic guitar?

With digital recording, the most important thing is to not exceed the maximum signal level of 0 dB, and it’s a good idea to leave plenty of headroom. When setting levels, play the loudest you expect to play and aim for peaks of no more than -6 dB, with average levels around -20 dB.

Should I record vocals and guitar at the same time?

The most popular option is to track the sources separately, allowing for independent control. However, with the right artist and song, recording vocals and guitar simultaneously is often the best approach, because you can capture a single, special performance in one go, rather than stitching together two separate ones.

Should you record acoustic guitar in stereo?

Simply put, if you want to record the best possible range of high and low frequencies for your acoustic track, using stereo recording is your best bet, otherwise you will end up with a fraction of the frequencies that are not nearly as wide in range.

How do you EQ like a pro?

1. Tip 1 – Have an intention.
2. Tip 2 – Don’t rely on EQ alone, especially to shape the tone.
3. Tip 3 – Prioritize cuts, but still use boosts.
4. Tip 4 – Avoid applying EQ in solo.
5. Tip 5 – Small changes soon add up.
6. Tip 6 – Be more subtle with stock parametric EQs.
7. Tip 7 – Don’t obsess over plugin order.

What should an acoustic guitar EQ look like?

Every track is unique, but in general a good EQ setting to start with is around 80 Hz with a 0.75 Q at about a 24 dB per octave roll off. This ensures the sub-bass is nearly silent and the bass range is drastically more quiet. Even as a singer-songwriter with just vocals and guitar you’ll want to do this.

What’s the difference between an SM57 and SM58?

The main difference is in the grille. The SM58 was designed for vocal applications, and therefore uses a ball grille with built in pop filter to eliminate plosives. The SM57 is designed as an instrument microphone, where a smaller grille size is more practical and plosives are less of a concern.

Is the SM58 good for recording?

Yes, Shure SM58 is good for recording vocals and it is a great microphone to have in your studio. The shure SM58 is traditionally used as a live vocal performance microphone. There are advantages that can arrive from recording vocals using the Shure SM58.

What should I use to record my acoustic guitar?

If you can hear things like fret buzz or your guitar isn’t playing as nicely as you’d hope, this may well come across in your recordings. The main piece of kit tasked with recording your acoustic guitar is the microphone (or microphones) you will be using. Some people consider just one to be enough, and done right one mic can do the job.

Can you record vocals and guitar at the same time?

Even if you record vocals and guitar to separate tracks using different mics, the sound of each will “bleed” into the other tracks. Recording the guitar part alone, and then overdubbing the vocal, may help create a more professional sound.

When to use acoustic guitar in a mix?

If your final product will be a sparser recording, you may want the acoustic guitar to fill up more space in the mix. This is where stereo acoustic guitar recording techniques come in handy.

Can a single mic be used for guitar and vocals?

One Vocal Mic + Mid-Side Pair on Guitar. Another interesting option to try is a single mic for the vocals and a mid-side pair for the guitar. The mid-side pair on the guitar gives you more control over the stereo image in the mix, and the single vocal mic gives you a focused vocal track that you can pan right down the middle of the mix.