Contents
Can I use a 36v controller with a 48v motor?
Your 36V controller might not work with a 48V battery. It might be programmed to fault out and quit when voltage exceeds a preset level. Low voltage cutoff will be set for a 36V battery, not 48V, so it will not protect your 48V battery.
Can I use a 36v controller with a 24V motor?
You can use a controller rated for 36V on a 24V system, but you need to make sure it doesn’t have an LVC or that it is already set low enough for your 24V pack (or you have to alter or defeat it, and then use something else to monitor your pack for LVC).
Can I use a 60V battery on a 48v motor?
Re: How to use a 60v battery pack on 48v motor You need to know the max voltage charge of your 60V pack to determine if it will work with your setup. What’s the specs on the pack? At worst, you will need a new controller, but if max charge is 60V, then it will work fine without a problem.
Can you charge a 36v battery with a 48V charger?
No!!! The voltage of the charger must be matched to the voltage of the battery system being charged. A 48 volt charger would see your 36 volt battery system as a very under-charged battery (not being 48 volts) and the net effect would be to damage your batteries attempting to bring them up to 48 volts.
What is the difference between 24V and 36V motor?
The 24V motor at 24V gives you 500W at 2600 RPM and the 36V motor at 36V gives you 500W at 2600 RPM. Equal power. No difference in range, if your batteries were the same type and mass for the 24 and 36V systems, meaning that the energy for the 2 systems is equal (which would be Whr).
Can a 48V controller handle 72V?
Re: can a 48v 1000w controller handle 72v ? The motor can certainly handle it.
Can I use a 42V charger on a 36V battery?
42V Battery Chargers for Lithium ion batteries that 10 cells connected in serial. For example, for a 36V 9 Ah lithium ion battery, it is recommend to choose a 42V charger with maximum output current 3 Amps or less.
Can a 36V controller run with a 48v battery?
Some 36v controllers can run with 48v. There’s no point in being gentle. the smoking happens or not when you only connect the battery. After that, the faster you run the motor, the better it is for everything. Some controllers are dual voltage and can switch over automatically.
Can a 52 volt controller be replaced with a 48 volt one?
Replaces controllers with fewer connectors because most of the connectors are optional to use. Automatically selects under Voltage protection of 41 Volts with 48 Volt battery packs, 52 Volts with 60 Volt battery packs, and 52.5 Volts with 64 Volt battery packs.
What’s the maximum voltage on a 48 volt scooter?
Uses standard 3-wire variable speed hall-effect throttle. Designed for 48 Volt DC electric scooter and bike motors up to 750 Watts. Maximum current 25 Amps. Under Voltage protection 42 Volts. Current limiting feature helps prevent controller and motor damage due to over-current conditions.
Can a 36V battery be switched off automatically?
Some controllers are dual voltage and can switch over automatically. Others are fixed. If you have a fixed 36v controller, it won’t cut off when the battery is flat, which can damage the battery.