Contents
CAN protocol license?
The CAN Protocol is a patented product developed by Robert Bosch GmbH. In addition to the CAN IP modules offered by Bosch, a CAN Protocol License is required. The CAN Protocol License is also required for self-developed CAN modules, or for CAN modules purchased from other vendors.
CAN FD vs CAN XL?
CAN XL has as CAN FD two bit-rate phases. In the arbitration phase the bit-rate is limited to 1 Mbit/s as in Classical CAN and CAN FD. In the data-phase, the bit-rate can be increased, because just one node is transmitting.
CAN protocol document?
1 INTRODUCTION. The Controller Area Network (CAN) is a serial communications protocol which.
CAN bus High Low?
CAN bus uses two dedicated wires for communication. The wires are called CAN high and CAN low. When the CAN bus is in idle mode, both lines carry 2.5V. When data bits are being transmitted, the CAN high line goes to 3.75V and the CAN low drops to 1.25V, thereby generating a 2.5V differential between the lines.
What are the requirements for a school bus driver’s license?
Pass the knowledge tests. In addition to meeting the general eligibility requirements, you must pass written knowledge tests to earn a CLP. If you want to drive a school bus, you have to pass the general commercial driving test as well as additional tests for the passenger vehicle and school bus endorsements.
How to become a school bus passenger endorsement?
School Bus Endorsement. To earn a school bus “S” endorsement, you must FIRST qualify for a passenger “P” endorsement. This means you must pass the “P” endorsement test prior to taking the “S” endorsement test.
What does a CAN bus device driver do?
Low-Level Driver: The CAN BUS Device Driver enables the access to hardware resources, for the upper software layers. It also offers access to the hardware independent API, to the application layer. Extensive experience in successful integration of CAN software and CAN Interface Layer (CAN IF).
Can you drive a school bus without a passenger?
With a CLP, you may only drive a commercial passenger vehicle with a supervising driver (without passengers). Complete a medical assessment. Most states require a physical examination that will determine whether or not you are physically able to operate a vehicle with children or passengers.