Can two router interfaces be on the same network?

Can two router interfaces be on the same network?

A router routes between networks, not from an interface in one network to an interface in the same network. The routing table would not work correctly if you had two interfaces in the same network, and that is why routers don’t let you assign the same network to two different interfaces.

How do I ping between two subnets?

1. Use Route Tables. Your route table will be where this is indicated.
2. Syntax. route add -p mask
3. Example. route add -p 192.168.1.0 mask 255.255.255.0 10.100.98.25 route add -p 192.168.0.0 mask 255.255.255.0 10.100.98.87.

How do I ping a router interface?

To send the router a friendly ping, follow these steps:

1. From the Start menu, choose All Programs→Accessories→Command Prompt.
2. To discover the router’s address, type ipconfig and press Enter.
3. Type the command ping, a space, and then the IP address of the router, or default gateway; press Enter.

How do I ping across a network?

To ping another network device using a computer running Windows, complete the following:

1. To bring up the run dialog, press the Windows key + R.
2. Type cmd and press Enter.
3. Type ping and press Enter. The IP address is XXX. XXX. XXX. XXX, where XXX is a number between 0 and 255. For example, to ping 192.168.

How do I add a second router to my network?

Plug the non-Wi-Fi adapter into a power socket near your router and connect the two with an Ethernet cable. Plug the other adapter (after pairing, if necessary) into any other power socket in your home and it will create a new Wi-Fi network to which you can connect your important devices.

Can subnets ping each other?

6 Replies. Can you ping devices in the same subnet? If you can ping in the same subnet but cannot ping the other subnet most likely no route to the other subnet.

How do I ping a specific interface?

Ping using specific gateway interface or source IP address

1. Initially, Unix-like systems had ping command.
2. To find out your interface names on a Unix-like or *BSD system run the ifconfig command:
3. One can set socket sndbuf.
4. Seems like “ISP A” offers the better option as it takes less time to make a complete round trip.

Can a router Ping across two different networks?

The only thing i guess, you need to do is to add a route on host1 and 2: Router already knows hoe to reach the two networks, ´cause it have directly connected. You need to have routing set up on the routers so that every router which is on the networks of the two hosts knows how to reach the other network.

Why does my router not Ping between VLANs?

So I set up router on a stick, and it seems simple enough but I’m missing something and cannot figure out what! I’m able to ping the sub interface from either of my computers on different vlans, but I can’t ping between vlans. Background: Have 3 vlans set up. 1 – Native mgmt VLAN, 2 – VLAN CFP, 3 – VLAN ITAM on my switch.

Why does PC 4 Not Ping from router 5?

E.g. router 5 has a static route to the network 192.168.3.0. Therefore if PC 4 send a ping to PC , should the packet not travel to router 5 and the router 5 see that the packet is intended for another network listed in its route table and pass the packet through? 0·Share on FacebookShare on Twitter jtdk985BannedPosts: 57■■□□□□□□□□ May 2011

Why do you Not Ping on the same interface?

You avoid any security concerns when you would receive and send the same traffic on the same interface. You avoid “doubling” the outbound traffic by not receiving and sending the same traffic on the same interface. Increased redundancy when using HSRP, VRRP, GLBP or similar to provide gateway redundancy.