Contents
Can you install an SSD in a MacBook Pro?
Installing a new SSD is as simple as popping the case off of the Mac Pro, unlocking one of the PCIe slots, unscrewing the brackets and inserting the card. That’s all there is to it. Once the case is back in place and the Mac Pro is booted up after installing a new SSD, the drive will show up on the desktop.
How do I prepare my MacBook Pro for SSD?
Install the SSD into your USB enclosure and plug it up. Use Disk Utility (Applications>Utilities folder) to format the SSD, erasing it and formatting as “Mac OS Extended (Journaled)” with a single GUID partition. Then use Carbon Copy Cloner to clone your hard drive to the SSD.
How do I install a new SSD on a MacBook Pro?
The best way to do this is to boot up into Internet Recovery Mode on your MacBook Pro after you have installed the new SSD by holding either SHIFT-OPTION-COMMAND-R (if that works), otherwise OPTION-COMMAND-R. Then, go into Disk Utility and erase your drive as either an APFS or HFS+ (Mac OS Extended) partition.
What kind of SSD does a MacBook Pro use?
Mid 2012 and Early 2013 Retina MacBook Pros use a SATA-based SSD. The Late 2013, mid 2014 and mid 2015 models use a PCIe 2.0-based SSD instead. They are not interchangeable, so make sure to order the right part for your computer.
How can I transfer data from my MacBook Pro to my new hard drive?
When you start up your MacBook Pro, hold down the Option key and select your Mac’s original hard drive icon to boot. You can then format and partition the new SSD if necessary, and transfer your data back to it. Some SSDs arrive preconfigured with macOS software.
What should I do if my MacBook Pro does not recognize my SSD?
If your Mac fails to recognize the new SSD, reset the NVRAM before doing anything else. Here’s how 1) Shut down the Mac. 2) Connect it to its power charger. 3) Press the Power button to turn on the Mac, then immediately 4) Hold down the Command, Option, P and R keys until you hear the Mac restart again.