Contents
Can you polyurethane over oil based stain?
Can I apply water-based polyurethane over an oil based stain? Short answer: yes. Longer answer: if you wait for the oil-based stain to properly ‘dry’ (cure) it’s no longer oily.
Can I use varathane over oil stain?
Yes! But you must follow ONE simple rule to ensure the best possible finish: the underlying finish must be absolutely dry. When using a water-based product over an oil-based product, such as water-based High Performance Topcoat over oil-based Gel Stain, wait 72 hours before applying the water-based product.
How long after oil based stain can I polyurethane?
For an oil base stain waiting about 4 hours should be sufficient for either oil base or waterbase polyurethane.
Can you put water based varathane over oil based varathane?
Answer: In most cases, it is OK to use a water-based polyurethane over an oil-based finish in good condition. You should remove grease, dirt and wax by scrubbing the surface with a wood prep/cleaner/de-glosser, or mineral spirits and synthetic steel wool.
What is the best top coat for oil based stain?
Polyurethane is most typically used on stained wood and gives a very durable finish. I don’t recommend polyurethane for painted furniture, because it tends to yellow the paint over time. It’s also oil-based, which works best on top of stained wood and other oil-based paints.
What can I put over oil based stain?
Water-based poly can have adhesion problems when applied over an oil-based stain that’s not thoroughly cured. That’s why you should always apply a barrier coat of dewaxed shellac to seal oil-based stain. After the shellac dries, a light scuff-sand will leave an excellent surface for the poly to grip.
Can you use water based finish over oil stain?
ANSWER: Yes! but the underlying finish has to be absolutely dry. When using a water based topcoat over an oil based stain, allow oil based finishes, such as Java Gel Stain, to dry at least 72 hours before coating with a water based topcoat.
Is varnish and stain the same thing?
Varnish and stain are both products that are applid to wooden surfaces. At its most basic, the difference between varnish and a stain is that a stain imparts an additional colour, literally “staining” the surface and grain of the wood into any of a wide variety of different shades.
Can I use a water based polyurethane over an oil based stain?
You may apply the Minwax Water Based Polyurethane over a fully cured Minwax Wood Finish Stain (oil-based). Please use the following guidelines: To ensure the color fastness of Minwax Wood Finish prior to applying Minwax Water-Based Polyurethane: 1.) Allow final coat of stain to dry 8-24 hours (Dry time is affected by your ventilation
Is oil based or water based stain better?
A water based stain will also retain its color better than oil. They are more breathable meaning they won’t trap moisture which can cause a stain to fail. Other factors worth noting with water based stains are fewer odors, a quicker drying time, are non-flammable, and they clean up with soap and water.
Is polyurethane an oil based varnish?
Polyurethane is a water- or oil-based plastic resin used for coating wood or as a wood finish. Varnish is an older type of finish made from resins, oils, and solvents, but very often, the term “varnish” is misused as a generic name for all types of wood finishing. This comparison talks about polyurethane only in the context of wood-finishing and coating, not in the context of manufacturing high-resilience foam products as it is usually understood.