Can you run LED drivers in parallel?
Unfortunately, this is not possible. In order to parallel two Mean Well LED drivers both would need to have a ‘current sharing’ function. There is a general belief that you can connect any two power supplies in parallel if you use two diodes to isolate the supplies.
How do you calculate resistors for LEDs in parallel?
We’ll use the following formula to determine the resistor value: Resistor = (Battery Voltage – LED voltage) / desired LED current. For a typical white LED that requires 10mA, powered by 12V the values are: (12-3.4)/. 010=860 ohms. To use several LEDs in parallel, sum the current values.
How to wire series and parallel circuit LEDs?
1 Same current flows through each LED. 2 The total voltage of the circuit is the sum of the voltages across each LED. 3 If one LED fails, the entire circuit won’t work. 4 Series circuits are easier to wire and troubleshoot. 5 Varying voltages across each LED is okay.
What happens when a string of LEDs is overdriven?
Varying voltages across separate strings results in the current not being divided equally. When one string draws more current than another, the LEDs being overdriven will heat up and their forward voltages will change more, resulting in more unequal current sharing; this is called thermal runaway.
What happens when you run a parallel circuit?
One thing to keep in mind about running parallel and series/parallel circuits is that if a string or LED burns out, the LED/string will then be cut out of the circuit so the extra current load that was going to that LED will then be distributed to the rest.
How many parallel strings in a 12V DC Circuit?
However, 12V dc is enough to run three in-series (3 x 2.98= 8.94V dc ). And, from the parallel circuit rule number 3 we know that total current output gets divided by the number of parallel strings.