Contents
Do you have to sand between coats of Arm-R-Seal?
Finish sand between coats with a fine-grade (220-320) foam sanding pad or 400-grit sandpaper to improve smoothness and adhesion. Remove dust with a vacuum, compressed air, a tack cloth or a water-dampened rag.
Does Arm-R-Seal darken wood?
Arm-R-Seal will not darken as it has UV inhibitors, but it will start flaking when the inhibitors wear out. A light sanding and a light coat will fix that¹.
How long does it take for general finishes top coat to dry?
Specifications
| Basic Features | |
|---|---|
| Dry Time – Touch | 30+ min. |
| Dry Time – Recoat | 2+ hr |
| Dry Time – Light Use | 7-10 days |
| Dry Time – Cure | 21 days |
Is General finishes arm R Seal Food Safe?
If you intend to prep or chop food, either General Finishes Arm-R-Seal Topcoat or General Finishes Butcher Block Oil could be applied. However, neither product will withstand continuous water use or standing water, or hold up to knife cuts.
Should you wipe stain off?
The basic rule for getting good results with any stain is to apply a wet coat and wipe off the excess before it dries. You can even dip the object into stain or pour the stain onto the wood and spread it around. It’s only important that you wipe off all the excess before the stain dries.
Is there such thing as arm are seal?
Yes, more solids can gives you the “plastic” look. That’s your woods suit of armor, hence the name Arm-R-Seal, Arm = Armor. Last, as the others suggested, did you keep the finish mixed?
How long does it take to dry arm are seal?
Dry Time Between Coats Dry 12-24+ hours between coats when applying over raw or stained raw wood, and dry 72+ hours between coats when working over an existing sealed finish in ideal conditions: 70°F/20°C; 50-70% humidity. Inadequate dry time is one of the top reasons for finish failure.
Can you use arm are seal over linseed oil?
Arm-R-Seal can be used over Danish Oil, Linseed Oil & Tung Oil after they are dry. Allow oil to dry overnight before applying GF product. Dry 12-24+ hours between coats when applying over raw or stained raw wood, and dry 72+ hours between coats when working over an existing sealed finish in ideal conditions: 70°F/20°C; 50-70% humidity.
Which is best arm are seal or oil based topcoat?
Arm-R-Seal Oil Based Topcoat Arm-R-Seal Oil-Based Topcoats are made with the highest-quality urethane resin, making them extremely durable and long-lasting. Formulated to be wiped on with a cloth or applied with a foam brush, this ambering finish penetrates to provide deep-down protection for that “natural” look.