Contents
- 1 Does coolant flow through the throttle body?
- 2 Does coolant run through IACV?
- 3 Why does coolant go through the throttle body?
- 4 What can be done to prevent air from getting trapped in the cooling system when the coolant is replaced?
- 5 Which is an example of an IAC controlled engine?
- 6 What is the throttle valve body inlet pipe?
Does coolant flow through the throttle body?
Registered. They are not critical to coolant flow, they are much to small to effect the main cooling system. You should NOT just delete them if it EVER gets near freezing where you live or drive as your throttle valve could ice shut. All modern vehicles run coolant through the throttle body, VW is no different.
Does coolant run through IACV?
So the answer to your question is if you want your IACV to do it’s job then yes it needs the coolant lines.
What controls the flow of the coolant?
The engine cooling system is comprised of engine coolant, passages inside the engine block and cylinder head(s), a water pump to circulate the coolant, a thermostat to control the temperature of the coolant, a radiator to cool the coolant, a fan to pull air through the radiator, a radiator cap to control the pressure …
What controls the intake air flow at idle?
The idle air control valve controls the air needed to maintain a steady idle speed. It essentially acts as a bypass of the throttle body plate. The solenoid in an idle air control valve can get stuck.
Why does coolant go through the throttle body?
In most cases this is done to keep the throttle plates from freezing when it’s cold outside. The coolant running through there can provide a lot more heat than is normally available without it, even with a cold vehicle.
What can be done to prevent air from getting trapped in the cooling system when the coolant is replaced?
What can be done to prevent air from getting trapped in the cooling system when the coolant is replaced? Use the coolant exchange machine that draws a vacuum on the system or open the air bleeder valves while adding coolant.
Where does the coolant flow from the IAC to TB?
There is a great picture here which shows exactly how the coolant flows through the IAC to the TB. More than likely it’s not flowing through the IAC, but rather around the throttle body. In most cases this is done to keep the throttle plates from freezing when it’s cold outside.
Why does coolant run through the throttle body?
The reason they have coolant running through the throttle body is to prevent frosting in cold weather. If you live in a warm weather area, you can bypass this in most cases. One of the problems with running coolant through the throttle body is it actually makes the throttle body hot once the engine has warmed up.
Which is an example of an IAC controlled engine?
One such example is the Mazda 2L 4 cylinder FS used in the 626. The IAC is ECU controlled, and there is a coolant temperature sensor, so what would be the purpose of running coolant through the IAC?
What is the throttle valve body inlet pipe?
The throttle valve body inlet pipe (55354563) is really flimsy, besides it is designed for one installation only, it breaks if you try to remove it. For me it looks like an intentional sabotage of z18xer engine.