Contents
Does PLA melt in the sun?
PLA’s melting temperature is at around 160°C to 180°C, meaning that it will never melt in the sun, regardless of where you live. Nonetheless PLA is less resistant to heat than other filaments like ABS, PET or PETG, and is usually not recommended for uses that require prolonged exposure to the outdoors and the sun.
Which is stronger nylon or ABS?
Nylon is a flexible, durable plastic with less strength and stiffness than both PLA and ABS. Nylon is tougher and more resistant to chemicals than ABS and PLA, but its low strength and stiffness keep it from being widely used in the manufacturing industry.
What should the first layer settings be on cura?
There is a lot of information to sift through when it comes to 3-D printing, especially when it comes to first layer settings. So, when I began my journey beyond the Cura recommended settings, I decided to gather everything I learned about first layer settings together in one article to make it a little easier.
What are the settings for the raft in Cura?
Important settings for the raft: Initial Z Overlap: This lowers all layers of the model except for the first layer so it can be compressed against the raft. Raft Base Layer: This layer will look oversized since it needs to be pressed right up to the build plate.
How often should I relevel my Cura build plate?
I recommend you relevel the build plate every 3-5 prints or use a printer with an auto-level feature. You can use a single piece of paper to get your nozzle the correct height. A sheet of paper is about 0.1 mm thick, so it can be folded to increase the nozzle height needed for your model.
What should the shell thickness be in Cura?
Shell Thickness: These settings define the thickness of the wall of your print. Cura will automatically add or reduce lines for the shell depending on how thick it is set. Bottom/Top Thickness: This defines the number of solid layers at the bottom and top of the print. The default setting is 0.8 mm but can be adjusted if necessary