Contents
Does Wake-on-LAN require IP address?
You will need: A PC which supports WOL. The WOL computer should have a static IP address, one manually assigned or through static DHCP. In the example below, we assume your router LAN is 192.168.
Can you Wake-on-LAN without MAC address?
Once the router has forgotten the mac address, there’s no way to deliver the WOL packet to the machine to be woken from outside the network. From inside the network, you can still do it with a broadcast packet. Either way, you still need to know the mac address, since it’s part of the WOL packet.
What port is used for Wake-on-LAN?
UDP
The Port-Forwarding Method. Wake-On-LAN uses UDP. Many utilities use ports 7 or 9, but you can use any port you like for this. You’ll need to forward a UDP port to all IP addresses behind your router—you can’t just forward to a specific IP address.
How do I know if Wake on LAN is compatible?
- Click Start > Settings > Control Panel.
- Double-click System.
- Click the Hardware tab and click Device Manager.
- Expand the Network Adapters section.
- Right-click on your adapter and select Properties.
- Click the Advanced tab.
- Select Wake-on-LAN Options and click Properties. Set the following: Enable PME: set to Enabled.
How do I use Wake-on-LAN over the Internet?
Open the Windows Device Manager, locate your network device in the list, right-click it, and select Properties. Click the Advanced tab, locate “Wake on magic packet” in the list, and enable it.
Where do I enter my IP address for Wake on LAN?
Simply select Internet or Local subnet from the dropdown and enter the MAC address, IP address or host name, subnet mask (usually 255.255.255.255), and the port. If you are using Wake-on-LAN locally the internet address box doesn’t need to be filled.
Do you have to have a router to use Wake on LAN?
For Wake-on-LAN over the internet, you must have a router that is turned on in order to wake up a computer over the internet. Note: Make sure you configure your router to forward port 9 to the computer that you want to boot up otherwise it will not work because the Magic Packet can’t get into your network.
How does a computer wake up on a LAN?
When the network adapter receives a valid magic packet, the computer starts up. This packet of data is 102 bytes consisting of “FF FF FF FF FF FF” followed by 16 repetitions of the listening network device’s MAC address. Wake-on-LAN starts the computer from its “off” state and is like pressing the power button to turn it on and boot up as normal.
How can I Turn On my Computer from outside the LAN?
Just press the add button and select the device from the list. It’s IP and MAC addresses will be added so you don’t have to do anything else. If you are connecting from outside the LAN, replace the local IP with the external IP or add a new connection manually.