How are subnets connected to the same router?
Connectivity issues between subnets connected to the same router. Networks directly connected to a router are automatically installed into the routing table and are marked as connected, once the IP addresses are configured under the interfaces.
How many subnetworks does a Cisco router support?
Notice that each of the routers in Figure 2 is attached to four subnetworks, one subnetwork is common to both routers. Also, each router has an IP address for each subnetwork to which it is attached. Each subnetwork could potentially support up to 30 host addresses. This brings up an interesting point.
Can a router route packets between connected networks?
Routers are able to route packets between these connected networks without a routing protocol or static routes. Routers are able to route packets between these connected networks. Configuring a routing protocol is not required.
What is an IP address that has not been subnetted?
An IP address on a Class A network that has not been subnetted would have an address/mask pair similar to: 8.20.15.1 255.0.0.0. In order to see how the mask helps you identify the network and node parts of the address, convert the address and mask to binary numbers.
How is a network connected to a router?
Networks directly connected to a router are automatically installed into the routing table and are marked as connected, once the IP addresses are configured under the interfaces. Routers are able to route packets between these connected networks without a routing protocol or static routes.
How to connect two routers using static routing?
Using static routing, you’ll simply add an entry in the routing table on the router A to tell “if I have a packet for network 192.168.2.0, I’ll send it to the router 192.168.2.1 using my interface xxx”. Don’t forget to also create a static route on the router B (if you don’t, the communication will be unidirectional).
Can you connect two routers to the Wan?
I got two routers, both are connecting to the wan (giving them different external IP). is there anyway to connect those, so a computer on 168.0.x can access the printer (and other service) on 168.2.x (and vice versa)