Contents
How do I change the IP address on my HP switch?
Click on Quick Setup. In the Switch Quick Setup Parameters box, click on Change. Enter the IP address and any other information such as the Subnet mask and Gateway. Click on Save to save changes.
How do you change the IP address on a switch?
Select your network from the displayed list, and enter your password if prompted. Choose Change Settings then IP Address Settings. Go to Manual. Enter your IP address under IP Address and press OK to confirm.
What kind of switches are in the HP 2510?
Designed to provide essential solutions to small and medium businesses, the HP 2510 Switch Series consists of four Layer 2-managed. switches that provide reliable 10/100 and 10/100/1000 connectivity. Building off of the popularity of the HP 2510-24 Switch, a 24-port.
How to set up an IP address on a hp switch?
If you just want to give the switch an IP address so that it can communicate on your network, or if you are not using VLANs, HP recommends that you use the Switch Setup screen to quickly configure IP addressing. To do so, do one of the following: Enter setup at the CLI Manager level prompt. HP Switch# setup Select 8.
How can I change the IP address of a running switch?
Change the address, go to the machine in the other network and continue your work. If you have console (out-of-band) access, none of this mess is required. You normally would just overwrite it with e. g.: But if you stay on the same subnet, the switch will complain: The IP address (or subnet) 10.10.10.11/8 already exists.
Which is the default IP address for the switch?
In the factory-default configuration, the switch has one, permanent default VLAN (named DEFAULT_VLAN) that includes all ports on the switch. Thus, when only the default VLAN exists in the switch, if you assign an IP address and subnet mask to the switch, you are actually assigning the IP addressing to the DEFAULT_VLAN.