How do I connect two XBee modules?

How do I connect two XBee modules?

Add XBee modules to XCTU

1. Connect two XBee modules to your computer using the USB cables.
2. Launch XCTU.
3. Click the Configuration working modes button .
4. Click the Discover radio modules button .
5. In the Discover radio devices dialog, select the serial ports where you want to look for XBee modules, and click Next.

How far can XBee communicate?

Overview. The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight).

How do I use XBee with Arduino?

Connect the ground and 3.3V from the Arduino to the ground and power rails of your breadboard. Connect the power and ground rails of the breadboard to the 3.3V and GND pins on your Explorer module. Next, connect the XBee Explorer pin OUT to Arduino pin 2 (RX), and XBee pin IN to Arduino pin 3 (TX).

How do I connect two ZigBee devices?

The other device act as Zigbee Router. Connect the Xbee module configured as router in its circuit. The Xbee module is connected to the Arduino in the similar manner. An LED is interfaced with the Arduino at its PD2 (pin 4) pin through a pull up resistor of 220 ohms.

How do you communicate 2 XBee?

1. Step 1: Download X-CTU Software. The X-CTU software is free to download and provides a simple interface to configure and update your XBee transceivers.
2. Step 2: Put together your XBee breakout board.
3. Step 3: Configure 1st XBee as a coordinator.
4. Step 4: Configure 2nd XBee as Router.
5. Step 5: Test the configuration.

Why is ZigBee so expensive?

Zigbee devices are typically more expensive because they have to comply with various specifications from the Zigbee Alliance – giving rise to various subtle benefits compared to non-Zigbee devices. 1) What is Zigbee? 3.2) 2) A Mesh Network. 3.3) 3) Energy Consumption.

Why ZigBee is better than WiFi?

Zigbee network is more reliable as compared to Wi-Fi network. WiFi network is less reliable as compared to Zigbee network. It requires low bandwidth but greater than Bluetooth’s bandwidth most of time. It requires high bandwidth.

What are 3 types of nodes defined by ZigBee?

ZigBee specifies three different device types: the ZigBee Coordinator (ZC), the ZigBee Router (ZR), and the ZigBee End Device (ZED). These three devices play different roles in a ZigBee network as shown in Figure 19.1.