How do I find the vendor ID and product ID of a USB device?

How do I find the vendor ID and product ID of a USB device?

In the ‘Computer Management’ select ‘Device Manager’. Expand ‘Universal Serial Bus controllers’ and make a double click onto your USB device. Select ‘Details’ tab and select ‘Hardware IDs’. The red marked numbers in the screenshot are the USB Vendor and Product ID.

What is vendor ID and product ID in USB?

USB vendor IDs (VID) and product IDs (PID) are 16-bit numbers used to identify USB devices to a computer or other host. Each vendor ID is assigned by the USB Implementers Forum to a specific company, which in turn assign a PID to individual products.

How do I find the product and vendor ID of a USB device in Linux?

5 Answers. lsusb command queries information about currently plugged USB devices. You can use its -d option to query a certain vendor/product (but it seems to work only for currently plugged devices): $ lsusb -d 0e21:0750 Bus 001 Device 005: ID 0e21:0750 Cowon Systems, Inc.

How do I find my USB vendor ID and product ID in Ubuntu?

To find the vendor id and product id of a device we can use the command “usb-devices” . The command lists out details of all the usb busses in the system and if any device is connected to any of the bus, it gives information of that device.

How do I find my USB product ID?

Go to Control Panel > Device Manager and find your USB device. Double click the device or right click and select Properties. Go to the Details tab and select Hardware ID to view its PID and VID.

How do I find my vendor ID?

4 Answers. You can find a list of vendor ID at the usb.org website itself, it is under the tools section: http://www.usb.org/developers/tools/comp_dump this list has the companies and VID in Decimal numbers so you might need to convert it to a Hex number to get the correct one.

How do I find my USB vendor ID?

How do I find my USB ID?

What is the ID pin in USB?

With the ID pin at ground (GND), the OTG product functions as a USB host and provides VBUS to the attached USB peripheral. Otherwise, the OTG device functions as a USB peripheral. The plug’s ID pin is either grounded or left unconnected to select either host or peripheral functionality.

How do I find my USB serial number?

How to get the USB or other storage device serial number? For some USB devices, you can check serial number in the properties on Windows Explorer or using CMD. Open the Windows Explorer, and right-click the USB flash drive and select “Properties”. You will see the serial number under the “Details” tab.

Where do I find the vendor ID for a USB device?

The vendor ID, product ID, and revision number values are obtained from the USB device descriptor . The following table describes the possible registry entries for the vvvvpppprrrrr key. The USB driver stack considers these entries as read-only values.

Where do I find the USB interface identifier?

Each interface has a device ID of the following form: Where: v(4) is the 4-digit vendor code that the USB committee assigns to the vendor. d(4) is the 4-digit product code that the vendor assigns to the device. z(2) is the interface number that is extracted from the bInterfaceNumber field of the interface descriptor.

What is the vendor code for a USB hub?

When a new USB device is plugged in, the system-supplied USB hub driver composes the following device ID by using information extracted from the device’s device descriptor: v (4) is the 4-digit vendor code that the USB committee assigns to the vendor.

How can I identify an unknown USB device?

This article describes how to use the Windows device manager or Apple System Information to identify if a connected USB device is a product from SMART Technologies. Sometimes, a computer may report that a connected USB device is unknown if the required device drivers are not installed for the USB device.