Contents
How do I get sound from DVI to my TV?
DVI supports video signals only; it does not support audio. Since the DVI jack on the connected device does not output audio, the HDMI® connection on the TV is not receiving any audio. Therefore, the DVI-to-HDMI cable only provides the picture to the TV screen, but the TV speakers cannot output any sound.
How do I get sound from DVI to HDMI?
The audio can be carried over DVI to HDMI cable depending on the graphics card. For newer GPUs, you just need to set the HDMI audio device in the Windows Sound control panel. Older GPUs need to use a digital audio S/PDIF cable to connect from the PC to the graphics board’s on board S/PDIF connector.
Which is best HDMI or DVI?
HDMI is the best choice if you are just connecting a gaming console, blu-ray player or streaming device to your TV. DVI is a good choice if you’re looking to get the most out your high frame rate on a 1080p monitor. With the latest graphics cards, gaming at 4K resolution and a 120Hz refresh rate is possible.
Can you convert DVI to HDMI?
DVI to HDMI DVI is a digital signal in the same format as the video portion of HDMI. This means that if you are only using the video signal you can use a simple DVI to HDMI plug adapter that changes the physical connections.
Can I use both DVI and HDMI at the same time?
Yes, you can have both a monitor and TV connected to the GPU and it will work just fine.
How to change audio output on Raspberry Pi?
The following command, entered in the command line, will switch the audio output to HDMI: Here the output is being set to 2, which is HDMI. Setting the output to 1 switches to analogue (headphone jack).
Why does my Raspberry Pi not have sound?
After you have finished modifying your audio settings, you need to restart your Raspberry Pi in order for your changes to take effect. If you’re still not getting sound via HDMI. In some rare cases, it is necessary to edit config.txt to force HDMI mode (as opposed to DVI mode, which does not send sound).
Why is my HDMI not working on my Raspberry Pi?
This is caused by some computer monitors which select DVI mode even if an HDMI cable is connected. This fix may be necessary even if other HDMI devices work perfectly on the same monitor (or TV)! Edit the /boot/config.txt file ( see Raspberry-Pi Configuration File) and add the following line to the configuration file:
Can a Raspberry Pi use a DVI monitor?
It seems that the Raspberry Pi is very fussy about DVI converters and DVI monitors (just like it is with SD cards). Reply Pat Pattersonsays: June 8, 2012 at 1:08 pm