Contents
How do I install ICs on my computer?
Select the PCs wired Ethernet port. This is for use with our controllers and doesn’t apply to a stand-alone QX tool, but does have to be selected when first launching the software. Next, go to File->Log off. Then log in with user: supervisor and password: sollinger .
When is the ICS update coming to Xperia arc?
As a quick recap, Sony Mobile announced the rollout of the ICS Xperia update on Friday 13 April, but only for three of the 2011 Xperia range (Xperia arc S, Xperia neo V and Xperia ray). The original Xperia arc is not due to be updated until late May 2012.
When to use antivirus software in ICS systems?
When properly deployed and up-to-date, antivirus software is an important part of a defense- in-depth strategy to guard against malicious software (malware) in industrial control systems (ICS) 1 Antivirus is widely used in both ICS and information technology (IT) systems since it is an effective defensive measure against malware.
Which is the recommended secure network architecture for ICS?
The recommended secure network architecture for ICS (Figure 1) places the antivirus, Windows Server Update Services, and patch server(s) in the control center LAN DMZ 3 In this architecture, each level should only send or receive traffic to a directly adjacent level.
When to update and activate Cisco UCS Manager Firmware?
Activate—Sets the firmware in the backup partition as the active firmware version on the endpoint. Activation can require or cause the reboot of an endpoint. For capability catalog upgrades, update and activate occur simultaneously. You only need to update or activate those upgrades.
Do you need firmware for PWM feeders?
The firmware comes preset for the feeders mechanics. But it may be the case, that the servo angle is a little different from manufacturer and how the servo controller handles the incoming PWM signal. For this reason every feeder has a configuration set. Adapt it so that commanding the servo to 0°/90° indeed makes the servo go to 0°/90°.
How many servos can I control at once?
Using a simple serial interface you can control the position of up to 12 servo channels. Up to 10 snapshot positions can be saved and played back at any time. Start up values for each servo can be saved as well. There are two major parts to the application. The first part I will discuss is the firmware and hardware.