How do I reset my XBee module?

How do I reset my XBee module?

Where is a switch “Reset” on XBee module?

1. Insert module to adapter-board XBee-USB.
2. Connect cable micro-USB to computer.
3. Run X-CTU and press “Query/Request”.
4. Have dialog-box “Press and release Reset Switch …”

How do I transfer data from Arduino to XBee?

begin(57600); Serial. println( “Arduino started sending bytes via XBee” ); // set the data rate for the SoftwareSerial port xbee. begin( 19200 ); } void loop() { // send character via XBee to other XBee connected to Mac // via USB cable xbee. print( c ); //— display the character just sent on console — Serial.

What is Arduino XBee?

The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight).

How do I program Zigbee with Arduino?

Follow the following instructions to configure Zigbee series 1 module :

1. Connect your zigbee’s module to computer serial port using serial adapter.
2. Download virtual terminal or PuTTy for windows.
3. set your computer serial port.
4. click on local Echo box.
5. click ok.
6. save the time of session.

How do I program XBee with Arduino?

Just hook up the XBee module to the Explorer board and plug it with the laptop using USB cable. If you don’t have any converter or explorer board, then an Arduino board can be used as a USB to serial device which can easily communicate with the XBee and laptop.

What is XBee transceiver?

XBee – According to Digi “XBee modules are embedded solutions providing wireless end-point connectivity to devices. These modules use the IEEE 802.15. 4 networking protocol for fast point-to-multipoint or peer-to-peer networking.

How to set up an XBee module with Arduino?

Sparkfun XBee Wireless Kit (includes XBee shield, XBee Explorer USB, and 2 XBee modules) To use your XBee Shield with an Arduino, you’ll need to solder in some stackable headers. You will need to solder stackable headers onto your XBee.

What do the LEDs on the XBee shield mean?

The XBee shield has five LEDs connected to a pin on the XBee which indicates the different operations on the shield. You should be familiar with what each indicator means, this can be very useful when debugging later on. The table below will guide you through each operation the LED indicates:

What kind of network does SparkFun XBee module support?

XBee supports peer-to-peer as well as point-to-multipoint network communications wirelessly with a speed of 250 kbit/s. Sparkfun XBee Wireless Kit (includes XBee shield, XBee Explorer USB, and 2 XBee modules)

What kind of network protocol does XBee use?

It is a mesh communication protocol that sits on top of the IEEE 802.15.4 ZigBee standard. XBee supports peer-to-peer as well as point-to-multipoint network communications wirelessly with a speed of 250 kbit/s.