How do I set up FlexConnect?

How do I set up FlexConnect?

Configuring an Access Point for FlexConnect (GUI)

1. Select FlexConnect from the AP Mode drop-down list to enable FlexConnect for AP_3500E access point.
2. Click Apply to save your changes and the AP will reboot.
3. After the reboot the AP will have Flexconnect Tab.

How do I configure a Cisco WLAN controller?

Cisco Wireless LAN Controller (WLC) Basic Configuration

1. VLAN 10 is the management VLAN. The WLC uses the management interface to communicate with the access points, and we can use the management interface to configure the WLC through SSH or the GUI.
2. VLAN 20 and 30 are for wireless networks.

How do I manually configure a Cisco access point with a controller?

Configure

1. Have a DHCP server present so that the APs can acquire a network address. Note: Option 43 is used if the APs reside in a different subnet.
2. Configure the WLC for basic operation.
3. Configure the switch for the WLC.
4. Configure the switch for the APs.
5. Register the lightweight APs to the WLCs.

What does a FlexConnect local switching WLAN or SSID do?

Local Switched: Locally-switched WLAN’s (the SSID you are connected to) will map their wireless user traffic to a VLAN via 802.1Q trunking to a local switch adjacent to the access point. A branch user, who is associated to a local switched WLAN, has their traffic forwarded by the on-site router.

What is AP mode FlexConnect?

FlexConnect (previously known as Hybrid Remote Edge Access Point or H-REAP) is a wireless solution for branch office and remote office deployments. The FlexConnect access points (APs) can switch client data traffic locally and perform client authentication locally.

What is the difference between FlexConnect and local?

Locally switched means the traffic is terminated at the local switch adjacent to the access point. Flex Connect also known as HREAP by the old timers, allows data traffic to be switched locally and not go back to the controller.

How do I configure a WLAN?

Use the WPA2 security mode as the example.

1. On the Navigation pane, click Configuration > Network > WLAN to visit the WLAN page.
2. Select the Enable checkbox and then click Apply.
3. Configure the following settings: SSID – test. WLAN Interface – Select wlan0/1 from the drop-down menu.
4. Click OK to save the configurations.

How do I access my Cisco wireless controller?

Both the wired and wireless clients can access the dynamic interface of the controller using the CLI and GUI. To access the GUI of the controller enter the dynamic interface IP address of the controller in the address field of either Internet Explorer or Mozilla Firefox browser.

What is AP sniffer mode?

Sniffers allow you to monitor and record network activity, and detect problems. You must use Clear in AP mode to return the AP back to client-serving mode, for example the local mode or flexconnect mode depending on the remote site tag configuration.

What’s the difference between local mode and flex connect mode on AP?

Locally switched means the traffic is terminated at the local switch adjacent to the access point. Flex Connect also known as HREAP by the old timers, allows data traffic to be switched locally and not go back to the controller. In this mode, the AP can still function even if it looses connection with the controller.

How to configure a Cisco wireless LAN controller?

You can configure a backup RADIUS server for individual FlexConnect access points in standalone mode by using the controller CLI or for groups of FlexConnect access points in standalone mode by using either the GUI or CLI. A backup server configured for an individual access point overrides the backup RADIUS server configuration for a FlexConnect.

How does flexconnect work with Cisco wireless LAN controller?

The FlexConnect access points can switch client data traffic locally and perform client authentication locally when their connection to the controller is lost. When they are connected to the controller, they can also send traffic back to the controller.

How are flexconnect access points connected to the controller?

When they are connected to the controller, they can also send traffic back to the controller. In the connected mode, the FlexConnect access point can also perform local authentication. Figure 16-1 shows a typical FlexConnect deployment. This section contains the following topics: When an access point boots up, it looks for a controller.

How to create a flexconnect profile in Cisco?

Choose WLANs from Controller web interface to open the WLANs page. From the drop-down list, select Create New option and click on Go to open the WLANs > New page. From Type drop-down list, choose WLANS. In the Profile Name text box, enter a unique profile name for the WLAN. In this example Profile Name is Flexcon.